What it means
The HV battery temperature sensor G reports a circuit fault. Cell-group temperature monitoring impaired on this channel.
At a glance
- Usually lights the check-engine light
- The engine or gearbox may go into limp mode
How it works
Temperature sensor G measures a cell-group area inside the high-voltage battery so the battery control system can manage safe charging, discharging, and cooling. P0C7C sets when the sensor G circuit fails its electrical checks, leaving that temperature channel unreliable; the code does not by itself identify whether the sensor or its wiring is at fault.
Common causes
Most likely first.
- Temperature sensor failed
- Wiring fault
- Pack cell imbalance approaching service threshold
Symptoms
- EV/hybrid system warning light on
- Reduced power output or limp mode
- Charging may fail or be slowed
- Reduced electric range
How to diagnose it
- Read freeze-frame data and battery-system codes to see when sensor G failed and whether other battery temperature channels also reported faults.
- Compare live sensor G temperature with nearby battery temperature readings and ambient conditions to identify an implausible or missing signal.
- With the pack kept closed and high-voltage procedures followed, inspect accessible sensor G wiring and connectors for damage, looseness, or corrosion.
- Test the sensor G circuit and sensor using the manufacturer’s procedure, comparing results with its specification.
- Review battery cell data for imbalance separately, since a cell issue can coexist with but does not prove a sensor G circuit fault.
Common fixes
- Reconnect or repair a loose, damaged, or corroded sensor G connector.
- Repair damaged wiring in the sensor G circuit.
- Replace temperature sensor G if testing confirms it has failed.
- Address a separately confirmed battery cell imbalance or pack fault.
Can I keep driving?
Arrange prompt diagnosis and avoid charging or driving if the vehicle limits power, reports a battery warning, or behaves abnormally; missing sensor G data can cause conservative battery operation. Do not access the high-voltage battery or its sensor wiring yourself.
A code shows where the control module detected a fault, not always which part failed. Check the causes in order and confirm with a test before replacing parts. Have several codes? Check them together
This is a generic code: it means the same on every make. The car’s maker may add more detail in its own service information.