What it means
A receiving module detected implausible data from seat control module J. Seat position, memory recall or heating/ventilation values fail plausibility checks and are rejected.
How it works
Seat control module J reports seat position and may report memory, heating, or ventilation status over the vehicle network. Other modules check those values for plausibility; U054E sets when a receiving module rejects data attributed to seat module J.
Common causes
Most likely first.
- Module internal fault or sensor input drift
- Software version mismatch after replacement
- Gateway module routing CAN messages incorrectly
Symptoms
- Multiple warning lights may illuminate
- Affected modules may go into limp mode or shut down
- Specific functions inoperative depending on module
- Diagnostic tools may show communication faults
How to diagnose it
- Scan all modules and record U054E, related codes, and freeze-frame details to find which module rejected module J's data and under what conditions.
- Use live data to check module J's communication status and compare its reported seat position or memory, heating, and ventilation values with actual operation.
- Inspect module J's connectors, under-seat wiring, power and ground for looseness, corrosion, or damage, taking care around restraint-system wiring.
- Check for a recent seat-module replacement or software change and verify that module J's configuration matches the vehicle and seat.
- If the wiring and setup are sound, use the manufacturer's network checks to assess the module's messages and gateway routing.
Common fixes
- Secure or repair a damaged or loose connector or wire at seat control module J.
- Restore a poor power or ground connection to the seat module.
- Correct an incompatible module configuration or software mismatch after replacement.
- Repair or replace module J if its reported seat data remains implausible with sound wiring and correct setup.
- Repair gateway routing if network tests show module J's messages are being misrouted.
Can I keep driving?
The vehicle is usually drivable, but seat adjustment, memory, heating, or ventilation controlled through module J may be unavailable. Confirm the seat is safely positioned before driving.
A code shows where the control module detected a fault, not always which part failed. Check the causes in order and confirm with a test before replacing parts. Have several codes? Check them together
This is a generic code: it means the same on every make. The car’s maker may add more detail in its own service information.