What it means
The vehicle bus reports loss of communication with image processing sensor H. ADAS functions that depend on this camera (lane keeping, traffic-sign recognition, forward collision warning) may be inhibited.
How it works
Image processing sensor H is a camera-based module that sends visual data to other vehicle systems over the network. The receiving module sets U026C when it cannot communicate with sensor H, so driver-assistance features that rely on that sensor may be unavailable.
Common causes
Most likely first.
- Bus wiring open or shorted
- Module without power or ground
- Module failed
Symptoms
- Multiple warning lights may illuminate
- Affected modules may go into limp mode or shut down
- Specific functions inoperative depending on module
- Diagnostic tools may show communication faults
How to diagnose it
- Scan all modules for communication codes and note which module reports U026C and whether other network faults appeared at the same time.
- Review freeze-frame or fault records and live module status to see when sensor H stopped responding and whether its communication loss is current.
- Inspect sensor H's connector and the wiring along its harness for looseness, corrosion, water intrusion, pin damage, or chafing.
- Check the sensor H power and ground circuits under the conditions specified by the manufacturer, since a missing supply can make a healthy module disappear from the network.
- Test the relevant bus wiring for opens, shorts, or poor connections using the manufacturer's procedure, then assess sensor H itself if its power, ground, and network circuits are sound.
Common fixes
- Reconnect or clean and secure sensor H's connector if its terminals are dirty or loose.
- Repair damaged or chafed wiring in sensor H's power, ground, or communication circuits.
- Restore a failed power or ground connection to sensor H.
- Replace sensor H if its supplies and bus connections are correct but it still does not communicate.
Can I keep driving?
You can usually drive cautiously if steering and braking work normally, but do not rely on lane keeping, traffic-sign recognition, or collision warning functions that use sensor H. Allow extra following distance and get the fault checked promptly because those driver aids may remain unavailable.
A code shows where the control module detected a fault, not always which part failed. Check the causes in order and confirm with a test before replacing parts. Have several codes? Check them together
This is a generic code: it means the same on every make. The car’s maker may add more detail in its own service information.