OBD-II fault code

P2E8A: Proximity Detection Circuit B High

What it means

The proximity detection circuit B (SAE J1772 PD signal) reports a high condition. Charging cable plug detection is impaired.

At a glance

  • Usually lights the check-engine light

How it works

The J1772 proximity-detection (PD) circuit B helps the vehicle detect the charging plug at the inlet. The control module monitors this circuit for an abnormally high signal; a high reading can prevent reliable plug detection and charging.

Common causes

Most likely first.

  1. Charge inlet contacts dirty
  2. Wiring fault

Symptoms

  • Check-engine or charging-system warning light
  • Charging may not start or may be interrupted

How to diagnose it

  1. Check the stored code and freeze-frame data, then see whether charging fails consistently or only with a particular cable.
  2. With the vehicle safely powered down and the cable unplugged, inspect inlet contacts for dirt, moisture, damage, or corrosion.
  3. Check the circuit B connector and wiring for loose pins, corrosion, chafing, or a short to a power feed.
  4. Use a scan tool to compare the reported PD circuit B state while connecting and removing a compatible cable.
  5. If the inlet and wiring look sound, test circuit B continuity and for an unintended connection to power using the manufacturer's procedure.

Common fixes

  • Clean and dry contaminated charge-inlet contacts using an approved method.
  • Repair damaged or loose wiring and connector terminals in the PD circuit B.
  • Replace a damaged charge inlet if its circuit B contacts cannot make reliable contact.

Can I keep driving?

If the plug is not detected reliably, charging may not start or may stop, so do not rely on the vehicle until you have a dependable charge. Avoid forcing or repeatedly wiggling the connector, which can worsen inlet damage.

A code shows where the control module detected a fault, not always which part failed. Check the causes in order and confirm with a test before replacing parts. Have several codes? Check them together

This is a generic code: it means the same on every make. The car’s maker may add more detail in its own service information.

Codes for the same component

Nearby codes