P02C2: Cylinder 11 - Fuel Trim at Max Limit

What it means

The control module has reached the maximum fuel-trim correction for cylinder 11. This indicates a cylinder-specific mixture correction limit; the code alone does not identify the underlying cause.

At a glance

• Usually lights the check-engine light
• Affects emissions; the car can fail an emissions test

How it works

Cylinder 11's fuel trim is the module's adjustment to the fuel delivered for that cylinder. The module monitors whether that adjustment can keep the cylinder's mixture within its control range. P02C2 sets when the correction reaches its maximum in the direction of adding fuel, but it does not identify the cause.

Common causes

Most likely first.

1. Cylinder 11 mixture control requiring maximum correction toward more fuel
2. Vacuum or intake leak affecting cylinder 11
3. Restricted or under-delivering cylinder 11 injector
4. Low fuel pressure or injector-control fault

Symptoms

• Check-engine light on
• Rough idle or misfire
• Hesitation or reduced power
• Poor fuel economy

How to diagnose it

1. Save the freeze-frame data and compare cylinder 11's fuel-trim and misfire readings with other cylinders to see when the correction reaches its limit.
2. Inspect the intake runner, nearby vacuum hoses, and seals serving cylinder 11 for a leak that could admit unmetered air.
3. Check cylinder 11's injector connector and wiring for loose pins, corrosion, damage, or signs of a driver-control problem.
4. Compare cylinder 11 injector operation and contribution with other cylinders using suitable scan-tool or injector tests.
5. Measure fuel pressure and verify cylinder 11 injector delivery against the manufacturer's specification to distinguish a local restriction from a broader fuel-supply problem.

Common fixes

• Repair a vacuum hose, intake leak, or seal affecting cylinder 11.
• Repair a damaged or poorly connected cylinder 11 injector circuit.
• Clean or replace a restricted cylinder 11 injector as indicated by testing.
• Correct low fuel pressure or a fuel-supply restriction.
• Repair an injector driver fault if circuit testing confirms it.

Can I keep driving?

If the engine runs smoothly and the check-engine light is steady, limit driving and avoid hard acceleration until diagnosed. If it misfires badly or the light flashes, stop driving when safe; continued misfire can damage the catalytic converter.