C0610: Right Park Brake Actuator Control Circuit/Open

What it means

This code has no standardized generic meaning in the SAE/ISO list. Its meaning, if used by your vehicle, depends on the manufacturer.

How it works

C0610 is not assigned a standardized generic OBD-II meaning, so the title alone cannot establish what the right park brake actuator control circuit monitors or what condition sets the code. If the vehicle uses this code, its definition and test conditions are manufacturer-specific.

Common causes

Most likely first.

1. Manufacturer-specific code definition
2. Vehicle-specific diagnostic data needed

Symptoms

• Symptoms depend on the vehicle-specific fault

How to diagnose it

1. Confirm the exact code and description with a scan tool that can read the vehicle's brake or parking brake module.
2. Record the vehicle identification and module reporting the fault, then check manufacturer service information for the C0610 definition.
3. Review brake-module freeze-frame data and related codes before clearing anything, since those details may identify the affected circuit.
4. If service information confirms a right actuator circuit fault, inspect the right actuator connector and harness for damage or disconnection.
5. Follow the manufacturer's circuit test for the confirmed definition before replacing an actuator or module.

Common fixes

• Obtain the vehicle-specific C0610 definition and diagnostic procedure.
• Reconnect or repair a right actuator connector or harness only if the vehicle-specific procedure identifies that fault.
• Repair or replace the confirmed failed component according to the manufacturer's diagnostic results.

Can I keep driving?

Driving guidance depends on the actual vehicle-specific fault. If a brake warning is on or the parking brake will not apply or release normally, avoid driving until the fault is identified and the vehicle can be secured safely.