What it means
This code identifies a fault associated with Camera Washer Actuator A. The code alone does not specify the failure mode.
At a glance
- Usually lights the airbag (SRS) or body-system warning light
How it works
Camera washer actuator A operates the washer mechanism assigned to one camera. The control module monitors the actuator circuit and operation; this code means it detected a fault associated with actuator A, but does not specify whether the actuator, wiring, or module is at fault.
Common causes
Most likely first.
- Failed camera washer actuator
- Damaged wiring or connector
- Open or short in actuator circuit
- Fault in the washer control module
Symptoms
- Warning light or symbol related to the affected system
- Comfort or safety function impaired
How to diagnose it
- Scan the relevant body or driver-assistance module for related codes and freeze-frame data to identify when the camera washer actuator A fault was recorded.
- Locate the camera served by actuator A and check its washer fluid supply, nozzle, and hose for blockage, leaks, or a seized mechanism.
- Inspect actuator A’s connector and wiring for looseness, corrosion, moisture, or damage.
- Command actuator A with a supported scan-tool output test and check whether the washer mechanism operates.
- Test actuator A’s power, ground, and control circuit for opens or shorts against the manufacturer’s specification.
- If the actuator and circuit test correctly, inspect the washer control module and its connections for a driver fault.
Common fixes
- Refill washer fluid or clear a blockage in the camera A washer nozzle or hose.
- Clean and secure actuator A’s connector or repair damaged wiring.
- Replace a failed camera washer actuator A.
- Repair the washer control module circuit or replace the module if testing confirms it is faulty.
Can I keep driving?
Driving is generally possible, but a dirty camera lens can limit camera-based assistance or visibility. Keep the affected camera clean and do not depend on assistance features if its view is impaired.
A code shows where the control module detected a fault, not always which part failed. Check the causes in order and confirm with a test before replacing parts. Have several codes? Check them together
This is a generic code: it means the same on every make. The car’s maker may add more detail in its own service information.