OBD-II fault code

P26B6: Fuel Shutoff Valve B Control Circuit Stuck On

What it means

The control module monitors fuel shutoff valve B when it commands the valve to close. It sets this code when the valve is detected as remaining on or failing to close as expected.

At a glance

  • Usually lights the check-engine light

How it works

Fuel shutoff valve B is intended to stop fuel flow through its path when the control module commands it closed. This code means valve B remains on or open when commanded off, so fuel may not be cut off through that path as expected.

Common causes

Most likely first.

  1. Valve seized open by debris
  2. ECU output driver stuck on
  3. Carbon or debris buildup preventing free movement

Symptoms

  • Check-engine light
  • Engine may continue running after shutdown
  • Fuel may not shut off as expected

How to diagnose it

  1. Review freeze-frame data and related fuel-system codes, noting whether the engine continued running after shutdown.
  2. Inspect fuel shutoff valve B, its connector, and wiring for damage, corrosion, or signs of a short.
  3. Use a scan tool, if supported, to command valve B closed and check whether its status changes.
  4. Test valve B's control circuit for a short or persistent output using the manufacturer's procedure.
  5. If electrical power is removed as expected, check whether debris or a seized mechanism is holding valve B open.

Common fixes

  • Repair a shorted wire or damaged connector at fuel shutoff valve B.
  • Remove debris that prevents valve B from closing.
  • Replace the valve B solenoid or valve if it remains mechanically open.
  • Repair the control module output only if testing confirms its driver is stuck on.

Can I keep driving?

If the engine continues running after shutdown or fuel cannot be stopped as expected, park safely and seek prompt repair; do not continue driving with an unreliable fuel cutoff. An open valve may prevent fuel from being cut off when required.

A code shows where the control module detected a fault, not always which part failed. Check the causes in order and confirm with a test before replacing parts. Have several codes? Check them together

This is a generic code: it means the same on every make. The car’s maker may add more detail in its own service information.

Codes for the same component

Nearby codes