What it means
This code has no generic meaning assigned by SAE J2012 or ISO 15031-6. Any description for it is manufacturer-specific.
How it works
C0244 has no generic OBD-II meaning, so the exact engine-torque signal and receiving module depend on the vehicle. If the title matches the vehicle-specific definition, a module is monitoring torque information sent by the engine controller and sets the code when that signal is missing, implausible, or otherwise outside its defined conditions; verify which condition applies before diagnosing it.
Common causes
Most likely first.
- Manufacturer-specific diagnostic definition
- Vehicle-specific scan-tool decoding
Symptoms
- Symptoms depend on the vehicle-specific meaning
How to diagnose it
- Use a scan tool with access to the relevant modules and confirm the vehicle-specific definition, reporting module, and any related codes.
- Review freeze-frame or event data and compare requested and reported engine torque values if the scan tool provides them.
- Inspect the relevant module connectors, grounds, and network or signal wiring identified by the vehicle's wiring diagram.
- Check whether the engine controller has related faults that could make its torque information unavailable or implausible.
- Test the named signal or communication circuit and confirm module data against the manufacturer's diagnostic procedure.
Common fixes
- Repair loose, corroded, or damaged connectors on the identified signal path.
- Repair wiring or ground faults found between the engine controller and receiving module.
- Resolve related engine-controller faults that disrupt the torque information.
- Replace a module only if vehicle-specific testing confirms that it is not sending or receiving the signal correctly.
Can I keep driving?
Driving effects depend on the vehicle-specific definition; torque-based traction or stability functions may be limited. If the vehicle has reduced power, unstable behavior, or a warning affecting control systems, avoid demanding driving and arrange diagnosis promptly.
A code shows where the control module detected a fault, not always which part failed. Check the causes in order and confirm with a test before replacing parts. Have several codes? Check them together
This is a generic code: it means the same on every make. The car’s maker may add more detail in its own service information.