What it means
Fault on the night vision camera (typically a thermal/far-infrared camera that detects pedestrians and animals beyond headlight range).
At a glance
- Usually lights the airbag (SRS) or body-system warning light
How it works
The night vision camera detects heat patterns ahead, helping the driver see pedestrians or animals beyond the reach of the headlights. The control module checks the camera’s image and electrical or communication status; this code sets when the camera signal is missing or fails the system’s checks.
Common causes
Most likely first.
- Failed night vision camera
- Damaged or obstructed camera lens
- Open or shorted camera wiring
- Loose or corroded connector
- Camera power supply or communication fault
Symptoms
- Warning light or symbol related to the affected system
- Comfort or safety function impaired
How to diagnose it
- Record freeze-frame data and read related night-vision or communication codes to see whether the fault is limited to the camera.
- Check the display for a camera image or status message and note whether the fault is constant or intermittent.
- Inspect the camera lens and its surrounding area for dirt, ice, damage, or anything blocking its view, then clean it as directed by the vehicle instructions.
- Inspect the camera connector and visible harness for looseness, corrosion, water entry, chafing, or impact damage.
- Check camera power, ground, and communication circuits using vehicle wiring information and compare results with the manufacturer’s specification.
Common fixes
- Clean an obstructed night vision camera lens.
- Secure the camera connector and clean or repair corroded or damaged terminals.
- Repair damaged camera wiring or restore its power or ground supply.
- Replace the night vision camera if its view remains unavailable and its circuits test correctly.
- Repair the communication circuit or control module if testing identifies it as the cause.
Can I keep driving?
The night vision image or detection aid may be unavailable, so rely on your headlights, direct observation, and normal driving aids. Do not treat the system as a substitute for watching the road, whether or not this code is present.
A code shows where the control module detected a fault, not always which part failed. Check the causes in order and confirm with a test before replacing parts. Have several codes? Check them together
This is a generic code: it means the same on every make. The car’s maker may add more detail in its own service information.