B011A: Camera Washer Actuator R

What it means

This code identifies a fault associated with Camera Washer Actuator R. The code alone does not specify the failure mode.

At a glance

• Usually lights the airbag (SRS) or body-system warning light

How it works

Camera Washer Actuator R controls a washer mechanism assigned to R by the vehicle system. The control module monitors the R actuator circuit when commanded; this code flags a fault linked to that mechanism without telling whether wiring, the actuator, or a jam is responsible.

Common causes

Most likely first.

1. Failed camera washer actuator
2. Open or shorted actuator wiring
3. Loose, corroded, or damaged connector
4. Blown fuse or faulty driver circuit
5. Blocked or seized washer mechanism

Symptoms

• Warning light or symbol related to the affected system
• Comfort or safety function impaired

How to diagnose it

1. Use a scan tool to save freeze-frame data and related body-system codes, then command actuator R if the tool allows and check whether the fault recurs.
2. Identify the R washer assembly from the vehicle wiring information and inspect its actuator, connector, wiring, hose, and nozzle for damage, corrosion, leaks, or blockage.
3. Check the associated fuse and measure power and ground at actuator R during a washer command.
4. Test the R circuit for an open, short, or intermittent connection and inspect harness areas exposed to movement or rubbing.
5. If circuit checks pass, check whether the R mechanism moves freely and test the actuator against the manufacturer's specification.

Common fixes

• Clear debris or free a blocked R washer mechanism.
• Clean and secure the actuator R connector or repair damaged wiring.
• Replace a blown fuse after locating and correcting the cause.
• Replace a failed camera washer actuator R.
• Repair a faulty driver circuit if the R actuator and its wiring test correctly.

Can I keep driving?

Driving is usually possible if the camera lens remains clear, but the washer function assigned to R may be lost. Clean the lens as needed and take care if dirt or spray blocks a camera used for visibility or safety.