What it means
This code identifies a fault associated with the driver seat belt tension sensor. The restraint control module sets it when it detects a problem with this sensor; the specific fault is identified by accompanying subfault information.
How it works
The driver seat-belt tension sensor measures belt tension for the restraint control module, which uses the signal as part of its restraint-system decisions. The module monitors the tension-sensor signal and circuit for a fault; the accompanying subfault information identifies the specific condition.
Common causes
Most likely first.
- Damaged tension sensor wiring or connector
- Faulty seat belt tension sensor
- Seat belt retractor or belt mechanism fault
- Restraint control module fault
Symptoms
- Airbag warning light on
- Seat belt tension may be misreported
- Seat belt warning may stay on
How to diagnose it
- Retrieve the B0060 subfault and freeze-frame data with a restraint-capable scan tool before clearing the code.
- Check that the driver's belt extends and retracts smoothly and that the retractor and belt are not visibly damaged or obstructed.
- Inspect the driver tension-sensor connector and wiring near the belt mechanism for looseness, corrosion, chafing, or damage.
- Compare driver belt-tension data on the scan tool while the belt is slack and then gently drawn, following the vehicle's service guidance.
- Test the tension sensor and circuit using the manufacturer's procedure; evaluate the restraint control module only after the sensor and wiring pass.
Common fixes
- Reconnect or repair damaged driver tension-sensor wiring.
- Repair corrosion or damaged terminals at the sensor connector.
- Replace the faulty driver seat-belt tension sensor or specified retractor assembly.
- Repair or replace the restraint control module only after confirming its power, ground, connections, and sensor input.
Can I keep driving?
The vehicle may be driveable, but the restraint module may not correctly assess the driver's belt tension, which can affect how the system responds in a crash. Wear the belt correctly, avoid using a belt with a sticking or damaged retractor, and arrange prompt diagnosis.
A code shows where the control module detected a fault, not always which part failed. Check the causes in order and confirm with a test before replacing parts. Have several codes? Check them together
This is a generic code: it means the same on every make. The car’s maker may add more detail in its own service information.