Toyota Mirai recalls
7 official safety recalls for the Toyota Mirai from NHTSA (United States), DVSA (United Kingdom) and the EU Safety Gate, newest first. Recall repairs are normally free at the maker’s dealers.
Whether your car is affected and still needs the repair depends on its VIN or registration. Check it on the official site for your country:
- United States: nhtsa.gov/recalls
- United Kingdom: check-vehicle-recalls.service.gov.uk
Instrument cluster may not display warnings or indicators
The instrument cluster may fail to show warnings or indicators, including coolant temperature or electrical charge information, increasing crash or injury risk. Dealers will update the software over the air, free of charge.
Official NHTSA recall text
- Component
- ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
- Defect
- Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2025 Lexus UX Hybrid, 2024 Lexus GX, Toyota Mirai, and 2024-2025 Toyota Land Cruiser Hybrid vehicles. The instrument panel cluster combination meter may fail to display certain warnings or indicators. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 101, "Control and Displays" and in addition, for the subject Mirai vehicles, FMVSS 305, "Electric-powered vehicles: Electrolyte Spillage and Electrical Shock Protection."
- Consequence
- An instrument panel display that fails to show critical safety information, such as engine coolant temperature or electrical charge increases the risk of a crash or injury.
- Remedy
- Dealers will update the combination meter software through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed July 23, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 26LB06, 26LA06, 26TB10, and 26TA10.
Rear view image may freeze or fail to display
Parking assist software may cause the rear view image to freeze or not display. The parking assist ECU will be reprogrammed.
Official DVSA recall text
- Component
- Parking Assist ECU reprogram on multiple models
- Defect
- For certain vehicles equipped with a Parking Assist ECU a component of the Panoramic View Monitor (PVM) system that displays the rear view image the software may cause the rear view image to freeze or not display
- Remedy
- Reprogram the parking assist ECU.
Rearview camera image may freeze or go blank
A software error may freeze the rearview camera or leave the screen blank in reverse, reducing the driver's view behind the vehicle and increasing crash risk. Dealers will update the parking assist software free of charge.
Official NHTSA recall text
- Component
- BACK OVER PREVENTION:DISPLAY FUNCTION
- Defect
- Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2026 Toyota, Lexus, and Subaru Solterra vehicles equipped with a Panoramic View Monitor (PVM) system. Please see the recall report for a complete list of models. A software error may cause the rearview camera to freeze or display a blank screen when the vehicle is in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
- Consequence
- A rearview camera that fails to display an image can reduce the driver's view behind the vehicle, increasing the risk of a crash.
- Remedy
- Dealers will update the parking assist software, free of charge. Owner letters were mailed January 2, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 25TB13 and 25LB06. Subaru's number for this recall is WRE25.
Rearview camera image may be delayed
The rearview camera image may not appear within a couple of seconds after shifting into reverse, reducing the driver's rear view and increasing crash risk. Dealers will update the parking assist software free of charge.
Official NHTSA recall text
- Component
- BACK OVER PREVENTION:DISPLAY FUNCTION
- Defect
- Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2023 Mirai, Lexus LS500, LS500H, 2023-2024 Lexus ES250, ES300H, ES350, 2024 Lexus LC500, and LC500H vehicles equipped with a Panoramic View Monitor (PVM) system. Due to incorrect programming of the parking-assist electronic control unit (ECU) software, the rearview camera image may not immediately display within a couple of seconds after the shifter is placed into reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
- Consequence
- A rearview camera that fails to display an image can reduce the driver's rear view, increasing the risk of a crash.
- Remedy
- Dealers will update the parking assist ECU software, free of charge. Owner notification letters were mailed April 10, 2024. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for this recall are 24TA01 and 24LA01.
- Notes
- Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Stability control may stay off after restart
The stability control system may not turn on after restart if the driver previously disabled it. Driving with the system deactivated increases crash risk. Dealers will update the control unit software, free of charge.
Official NHTSA recall text
- Component
- ELECTRONIC STABILITY CONTROL (ESC):CONTROL MODULE:SOFTWARE
- Defect
- Toyota Engineering & Manufacturing (Toyota) is recalling certain 2022 Lexus LX 600, Lexus NX 350h, Lexus NX 450h+, Toytoa RAV4 Hybrid, 2021-2022 Lexus LS 500h, Toyota Mirai, RAV4 PRIME, Sienna, Venza, and 2020-2022 Toyota Highlander Hybrid vehicles. The Skid Control ECU software may not turn on the Vehicle Stability Control (VSC) system when the vehicle is restarted after the driver has disabled the VSC system. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 126, "Electronic Stability Control Systems."
- Consequence
- Driving with a deactivated stability control system increases the risk of a crash.
- Remedy
- Dealers will update the Skid Control ECU software, free of charge. Owner notification letters were mailed May 27, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 22TA03. Lexus' number for this recall is 22LA01.
- Notes
- Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
eCall system may fail when needed
The emergency calling system may not work when required. The remedy is to inspect the system and update DCM software; if the DCM is damaged, replace it with updated software.
Official DVSA recall text
- Component
- THE EMERGENCY CALLING SYSTEM (eCall) MAY NOT FUNCTION WHEN REQUIRED
- Defect
- The emergency calling system (eCall) may not function when required.
- Remedy
- Inspect the emergency calling system and update DCM software. If the DCM is found to be damaged replace it with updated software.
Fuel cell system may stop running
In certain driving conditions, the fuel cell system may malfunction. The fuel cell boost control module software will be updated.
Official DVSA recall text
- Component
- ELECTRIC FUEL CELL SYSTEM MAY STOP RUNNING
- Defect
- Under unique driving conditions such as if the accelerator pedal is depressed to the wide open throttle position after driving on a long descent with the use of cruise control there is a possibility that Fuel Cell system may malfunction.
- Remedy
- On affected vehicles update the control software of Fuel Cell Boost control module.
Sources: NHTSA (US National Highway Traffic Safety Administration), DVSA (UK Driver and Vehicle Standards Agency) and the EU Safety Gate (European Commission) recall data. Each recall covers vehicles sold in that market; models sold elsewhere may differ.