McLaren 600LT recalls

6 official safety recalls for the McLaren 600LT from NHTSA (United States), DVSA (United Kingdom) and the EU Safety Gate, newest first. Recall repairs are normally free at the maker’s dealers.

Whether your car is affected and still needs the repair depends on its VIN or registration. Check it on the official site for your country:

  1. Brake pipes may be connected incorrectly

    Reported April 22, 2025Model years 2019DVSA recall R/2025/1396 vehicles affected

    Incorrectly connected brake pipes may prevent the anti-lock braking system and electronic stability programme from working correctly. Check the connections and correct them if needed.

    Official DVSA recall text
    Component
    McLaren brake pipe recall (2025/002)
    Defect
    On affected vehicles the anti-lock braking system (ABS) and electronic stability programme (ESP) may not function correctly due to the brake pipes being incorrectly connected into the control module.
    Remedy
    Check pipes have been correctly connected and correct the connections if necessary.

  2. Brake lines may be routed incorrectly

    Reported April 9, 2025Model years 2020–2024NHTSA campaign 25V21600029 vehicles affected

    Incorrectly routed brake lines may activate the brakes on the wrong side and lock a rear wheel, which could cause loss of control. Dealers will inspect and correct the brake line connections as needed, free of charge.

    Official NHTSA recall text
    Component
    SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS
    Defect
    McLaren Automotive Incorporated (McClaren) is recalling certain 2020-2025 600LT, 720S, Artura, GT, and GTS vehicles. The brake lines may be routed incorrectly and cause the brakes on the incorrect side to activate, possibly resulting in one of the rear wheels locking up.
    Consequence
    A rear wheel locking condition may cause the driver to lose control of the vehicle, increasing the risk of a crash.
    Remedy
    Dealers will inspect and correct the brake line connections as necessary, free of charge. Owner notification letters were mailed on April 21, 2025. Owners may contact McClaren customer service at 1-646-429-8916.
    Notes
    Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1- 888-275-9171) or go to www.nhtsa.gov.

  3. Coolant hose connection may leak

    Reported September 21, 2023Model years 2018–2020DVSA recall R/2023/214370 vehicles affected

    A connection near the right radiator may leak coolant. The coolant hose temperature sensor housing and clamp will be replaced.

    Official DVSA recall text
    Component
    On affected vehicles the manufacturer has identified an issue with the hose connection in the area of the outboard right radiator where a coolant leak cannot be ruled out.
    Defect
    On affected vehicles the manufacturer has identified an issue with the hose connection in the area of the outboard right radiator where a coolant leak cannot be ruled out.�
    Remedy
    Replace the coolant hose temperature sensor housing and clamp.�

  4. Coolant may leak into the engine compartment

    Reported July 14, 2023Model years 2019–2020NHTSA campaign 23V484000652 vehicles affected

    A poorly sealed joint may let coolant leak into the engine compartment. If it contacts an ignition source, such as hot engine parts, fire risk may increase. Dealers will replace the coolant hose, temperature sensor housing and clamp free of charge.

    Official NHTSA recall text
    Component
    ENGINE AND ENGINE COOLING:COOLING SYSTEM:RADIATOR ASSEMBLY
    Defect
    McLaren Automotive Incorporated (McLaren) is recalling certain 2019-2020 600LT Coupe and Spider vehicles. The joint between the temperature sensor housing and the hose from the outboard radiator may not be sealed properly, which can result in coolant leaking into the engine compartment.
    Consequence
    A coolant leak in the presence of an ignition source, such as hot engine components, can increase the risk of a fire.
    Remedy
    Dealers will replace the coolant hose, temperature sensor housing, and constant pressure clamp, free of charge. Owner notifications letters were mailed September 7, 2023. Owners may contact McLaren customer service at 1-646-429-8916.
    Notes
    Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

  5. Brake assembly banjo bolt may be defective

    Reported August 26, 2021Model years 2019–2020DVSA recall R/2021/28924 vehicles affected

    A banjo bolt between a brake flexi-hose and caliper may not function properly. The brake hose assembly will be disassembled and the bolt inspected; a defective bolt will be replaced. The assembly will then be reassembled and the brakes bled.

    Official DVSA recall text
    Component
    THE BANJO BOLT MAY NOT FUNCTION PROPERLY.
    Defect
    The banjo bolt that is fitted between the flexi-hose and the caliper within the brake assembly on each corner of the vehicle may not function properly.
    Remedy
    Disassemble the brake hose assembly remove the banjo bolt and inspect it. In the event the banjo bolt is defective it will be replaced. The brake hose assembly will then be reassembled and the brakes bled.

  6. Brake bolt may cause brake failure at one wheel

    Reported July 23, 2021Model years 2019NHTSA campaign 21V56100019 vehicles affected

    A brake assembly bolt may lack the holes that supply fluid to the caliper, causing one corner's brakes to fail. The vehicle may pull to one side during braking, increasing crash risk. Dealers will inspect the bolt and replace it if necessary, free of charge.

    Official NHTSA recall text
    Component
    SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS
    Defect
    McLaren Automotive Incorporated (McLaren) is recalling certain 2020 570S, GT, 2019 600LT, and 2019-2020 720S vehicles. The brake assembly banjo bolt may be missing the holes that supply brake fluid to the caliper, which would cause the brakes to fail on one corner of the vehicle.
    Consequence
    Brake failure in one corner can cause the vehicle to pull to one side during braking, and increase the risk of a crash.
    Remedy
    Dealers will inspect and replace the banjo bolt, as necessary, free of charge. Owner letters were mailed September 1, 2021. Owners may contact McLaren customer service at 1-646-429-8916. McLaren's number for this recall is SRC 00 C 001.
    Notes
    Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

Sources: NHTSA (US National Highway Traffic Safety Administration), DVSA (UK Driver and Vehicle Standards Agency) and the EU Safety Gate (European Commission) recall data. Each recall covers vehicles sold in that market; models sold elsewhere may differ.

Back to the McLaren 600LT