Hyundai i40 recalls
3 official safety recalls for the Hyundai i40 from NHTSA (United States), DVSA (United Kingdom) and the EU Safety Gate, newest first. Recall repairs are normally free at the maker’s dealers.
Whether your car is affected and still needs the repair depends on its VIN or registration. Check it on the official site for your country:
- United States: nhtsa.gov/recalls
- United Kingdom: check-vehicle-recalls.service.gov.uk
ABS control unit may short circuit
The ABS hydraulic electronic control unit could short circuit, illuminating the malfunction or ABS warning light and causing a burning smell from the engine compartment or control unit. A low-capacity fuse will be installed in the engine compartment junction box.
Official DVSA recall text
- Component
- A potential safety defect has been identified which could occur within the ABS control unit. The ABS control unit within the affected VIN range could experience an electrical short circuit.
- Defect
- On affected vehicles the HECU (Hydraulic Electronic Control Unit) for the ABS could experience an electrical short circuit with a potential that the malfunction indicator light may become illuminated (MIL and /or ABS light) and a burning smell may emanate from the engine compartment and the HECU components.
- Remedy
- The affected vehicles will have a low-capacity fuse installed within the engine compartment junction box
Brake assistance may be lost
Brake assistance may be lost, reducing brake performance. The tandem pump drive belt and mesh filter are inspected and modified where appropriate; if the belt is defective, the pump and belt are replaced.
Official DVSA recall text
- Component
- Certain vehicles may experience a loss of braking assistance and brake performance may be reduced.
- Defect
- Certain vehicles may experience a loss of braking assistance and brake performance may be reduced.
- Remedy
- Visually inspect the tandem pump drive belt and mesh filter within the pump assembly and modify where appropriate. If the tandem pump drive belt is defective replace the pump and the drive belt.
Clutch inhibitor may allow starting in gear
The clutch pedal inhibitor may fail, allowing the vehicle to start in gear without the clutch pedal pressed. A modified inhibitor switch will be fitted.
Official DVSA recall text
- Component
- IT MAY BE POSSIBLE TO START THE VEHICLE WITHOUT DEPRESSSING THE CLUTCH PEDAL.
- Defect
- The clutch pedal inhibitor may fail and it will then be possible to start the vehicle in gear without pressing the clutch pedal down.
- Remedy
- On affected vehicles fit a modified clutch inhibitor switch to prevent this.
Sources: NHTSA (US National Highway Traffic Safety Administration), DVSA (UK Driver and Vehicle Standards Agency) and the EU Safety Gate (European Commission) recall data. Each recall covers vehicles sold in that market; models sold elsewhere may differ.