Daewoo Nubira recalls
6 official safety recalls for the Daewoo Nubira from NHTSA (United States), DVSA (United Kingdom) and the EU Safety Gate, newest first. Recall repairs are normally free at the maker’s dealers.
Whether your car is affected and still needs the repair depends on its VIN or registration. Check it on the official site for your country:
- United States: nhtsa.gov/recalls
- United Kingdom: check-vehicle-recalls.service.gov.uk
Camshaft position sensor may overheat
The camshaft position sensor may overheat, illuminate the engine management warning light and cause a localised thermal incident. The sensor will be checked and, if affected, replaced with a quality assured unit; an in-line fuse will be added.
Official DVSA recall text
- Component
- CRACK MAY OCCUR WITIN A CAPACITOR INSIDE THE CAMSHAFT POSITION SENSOR
- Defect
- The Camshaft position sensor may overheat causing the engine management warning light to illuminate and in the worst case a localised thermal incident may occur
- Remedy
- Vehicles likely to be affected will be recalled and the sensor checked. If affected the sensor will be replaced with a quality assured unit and an in-line fuse added
Camshaft position sensor may melt
A camshaft position sensor may melt, causing a burning smell and visible smoke, and may also melt the camshaft cover and sensor wiring. This could cause an underhood fire. Dealers will replace the sensors and install an additional fuse.
Official NHTSA recall text
- Component
- ENGINE AND ENGINE COOLING
- Defect
- ON CERTAIN PASSENGER VEHICLES, THE CAMSHAFT POSITION SENSOR MAY MELT RESULTING IN A BURNING SMELL AND VISIBLE SMOKE, WHICH MAY SUBSEQUENTLY LEAD TO THE MELTING OF THE CAMSHAFT COVER AND THE CAMSHAFT POSITION SENSOR WIRE HARNESS.
- Consequence
- THIS COULD POSSIBLY CAUSE AN UNDERHOOD FIRE.
- Remedy
- DEALERS WILL REPLACE THE CAMSHAFT POSITION SENSORS AND INSTALL AN ADDITIONAL FUSE. OWNERS SHOULD CONTACT DAEWOO PUERTO RICO AT 1-877-362-1234 OPTION 6.
- Notes
- CUSTOMERS CAN ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).
Camshaft position sensor may melt
A camshaft position sensor may melt, causing a burning smell and visible smoke, and may also melt the camshaft cover and sensor wiring. This could cause an underhood fire. Dealers will replace the sensors and install an additional fuse.
Official NHTSA recall text
- Component
- ENGINE AND ENGINE COOLING
- Defect
- ON CERTAIN PASSENGER VEHICLES, THE CAMSHAFT POSITION SENSOR MAY MELT RESULTING IN A BURNING SMELL AND VISIBLE SMOKE, WHICH MAY SUBSEQUENTLY LEAD TO THE MELTING OF THE CAMSHAFT COVER AND THE CAMSHAFT POSITION SENSOR WIRE HARNESS.
- Consequence
- THIS COULD POSSIBLY CAUSE AN UNDERHOOD FIRE.
- Remedy
- DEALERS WILL REPLACE THE CAMSHAFT POSITION SENSORS AND INSTALL AN ADDITIONAL FUSE. THE RECALL BEGAN ON SEPTEMBER 7, 2004. OWNERS SHOULD CONTACT DAEWOO AT 1-877-362-1234, OPTION 6, OR FIND A LOCAL DEALER THROUGH THEIR WEBSITE AT WWW.DAEWOOUS.COM.
- Notes
- CUSTOMERS CAN ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).
Transmission mounting bolts may break
Transmission mounting bolts could break. Their torque will be checked; if it is incorrect, the bolts and mountings will be inspected for damage and replaced if necessary.
Official DVSA recall text
- Component
- TRANSMISSION MOUNTING BOLTS MAY BREAK.
- Defect
- There is a possibility that the transmission mounting bolts could break.
- Remedy
- Recall affected vehicles check correct torque and if found incorrectinspect bolts and mountings for damage and replace if necessary.
Front brake hoses may crack
The outer rubber on the front brake hoses may crack and eventually leak hydraulic fluid. Both front brake hoses will be replaced with a new design.
Official DVSA recall text
- Component
- FRONT FLEXIBLE BRAKE HOSES MAY CRACK
- Defect
- It is possible that the outer rubber section of the front brake flexible hoses may crack and in the longer term leak hydraulic fluid.
- Remedy
- Replace both front brake hoses with a new design.
Front brake hoses may crack
The outer rubber layer of a front brake hose may crack, allowing the hose to rupture and leak brake fluid, which can reduce or eliminate braking. Dealers will install redesigned front brake hoses.
Official NHTSA recall text
- Component
- SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS
- Defect
- CERTAIN PASSENGER VEHICLES FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 106, "BRAKE HOSES." A CRACK CAN DEVELOP IN THE OUTER RUBBER LAYER OF THE FRONT BRAKE HOSE(S).
- Consequence
- THIS CAN RESULT IN BRAKE HOSE RUPTURE, BRAKE FLUID LEAKAGE, AND LOSS OF VEHICLE BRAKING.
- Remedy
- DEALERS WILL INSTALL NEW REDESIGNED FRONT BRAKE HOSES. OWNER NOTIFICATION BEGAN OCTOBER 27, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT DAEWOO AT 1-877-362-1234, SELECTION 1.
- Notes
- CUSTOMERS CAN ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).
Sources: NHTSA (US National Highway Traffic Safety Administration), DVSA (UK Driver and Vehicle Standards Agency) and the EU Safety Gate (European Commission) recall data. Each recall covers vehicles sold in that market; models sold elsewhere may differ.