Citroën C4 Picasso recalls
39 official safety recalls for the Citroën C4 Picasso from NHTSA (United States), DVSA (United Kingdom) and the EU Safety Gate, newest first. Recall repairs are normally free at the maker’s dealers.
Whether your car is affected and still needs the repair depends on its VIN or registration. Check it on the official site for your country:
- United States: nhtsa.gov/recalls
- United Kingdom: check-vehicle-recalls.service.gov.uk
On-board diagnostics may not detect emissions faults
A fault in the diagnostics for the selective catalytic reduction system or diesel particulate filter may prevent the malfunction indicator light from illuminating, so the vehicle may not meet emissions regulations. Engine control unit software will be updated.
Official DVSA recall text
- Component
- Emission recall â On Board Diagnostics
- Defect
- Vehicles may be affected by incorrect performance of the On-Board-Diagnostics related to Selective Catalytic Reduction system and/or Diesel Particle Filter. The Malfunction Indicator Light (MIL) may not illuminate in the event of a malfunction and therefore does not comply with emission regulations.
- Remedy
- Update the Engine Control Unit software to ensure compliance to regulations.
Engine software may cause emissions non-compliance
Under certain conditions, engine emissions may not meet regulatory requirements on affected vehicles below 12500 miles. The mileage will be checked and the engine control unit calibration updated if the vehicle is below 12500 miles.
Official DVSA recall text
- Component
- Cross carline Engine software
- Defect
- On affected vehicles below 12500 miles under certain conditions engine emissions may lead to a non-compliance to regulatory requirements.
- Remedy
- Check the mileage of the vehicle and update the ECU (Engine Control Unit) calibration on vehicles below 12500 miles.
Timing belt debris may affect brake assistance
Ageing engine oil may cause timing belt material to detach and affect the brake vacuum pump, risking reduced or lost braking assistance. Software will be updated to warn earlier; the belt will be checked and replaced if needed, along with other brake assistance parts and the vacuum pump as required.
Official DVSA recall text
- Component
- On the affected vehicles the operation of the brake vacuum pump may be affected by material detaching from the timing belt caused by the ageing of the engine oil.
- Defect
- On the affected vehicles the operation of the brake vacuum pump may be affected by material detaching from the timing belt caused by the ageing of the engine oil.
- Remedy
- To rectify this issue a software update will be downloaded which will improve the vacuum diagnosis (in order to warn earlier about the risk of loss or reduction of braking assistance). The timing belt will be checked and if needed replaced with other components of the braking assistance system and the vacuum pump.
Timing belt material may affect the brake vacuum pump
Material detaching from the timing belt as engine oil ages may affect the brake vacuum pump. A software update will improve vacuum diagnosis to warn earlier about possible loss or reduction of braking assistance.
Official DVSA recall text
- Component
- On the affected vehicles the operation of the brake vacuum pump may be affected by material detaching from the timing belt caused by the ageing of the engine oil.
- Defect
- On the affected vehicles the operation of the brake vacuum pump may be affected by material detaching from the timing belt caused by the ageing of the engine oil.
- Remedy
- To rectify this issue a software update will be downloaded which will improve the vacuum diagnosis (in order to warn earlier about the risk of loss or reduction of braking assistance).
Diesel particle filter may overheat and crack
The diesel particle filter may overheat and crack, which could harm the environment. The remedy is to recall the product from end users.
Official EU Safety Gate text
- Component
- Environment
- Defect
- The diesel particle filter may overheat and develop cracks. This could have a negative impact on the environment. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
- Remedy
- Recall of the product from end users
- Notes
- Notified by France
Timing belt material may affect brake vacuum pump
Material detaching from the timing belt may affect the brake vacuum pump. Detection software will be updated, and the pump and timing belt will be inspected and replaced if necessary.
Official DVSA recall text
- Component
- THE BRAKE VACUUM PUMP MAY BE AFFECTED BY MATERIAL DETACHING FROM THE TIMING BELT
- Defect
- The brake vacuum pump may be affected by material detaching from the timing belt.
- Remedy
- Update detection software inspect and if necessary replace vacuum pump and timing belt.
Diesel particulate filter may not filter as required
The diesel particulate filter may not meet the required filtering specification. The filter will be replaced.
Official DVSA recall text
- Component
- THE FILTERING PERFORMANCE OF THE DIESEL PARTICULATE FILTER MAY NOT MEET THE REQUIRED SPECIFICATION
- Defect
- The filtering performance of the Diesel Particle Filter (DPF) may not meet the required specification.
- Remedy
- Replace the DPF on affected vehicles.
Engine software calibration may cause excess NOx emissions
Engine management software calibration could cause NOx emissions to exceed regulatory limits. The engine management software will be updated.
Official DVSA recall text
- Component
- DUE TO THE CALIBRATION OF THE ENGINE MANAGEMENT SOFTWARE NOX EMISSIONS MAY NOT COMPLY WITH REGULATORY LIMITS
- Defect
- The calibration of the engine management software could result in emissions of NOx which do not comply with the regulatory limits.
- Remedy
- Download new engine management software
Oil gallery plug may leak oil
An incorrectly tightened cylinder-housing oil gallery plug could leak oil, creating a skid hazard for following traffic. The remedy is to recall the product from end users.
Official EU Safety Gate text
- Component
- Injuries
- Defect
- The cylinder-housing oil gallery plug may not have been correctly tightened. As a consequence oil might leak which presents a skid hazard for following traffic.
- Remedy
- Recall of the product from end users
- Notes
- Notified by France
Engine software may cause overheating and failure
Incorrect engine software could cause cooling errors and a malfunctioning high-temperature warning, allowing the engine to overheat unnoticed, leak oil or fail. The remedy is to recall the product from end users.
Official EU Safety Gate text
- Component
- Injuries
- Defect
- The cars have an incorrect version of the engine's software, leading to errors in the cooling strategy and malfunction of the engine's "high temperature" warning system. This could lead to unnoticed overheating of the engine, which may leak oil and also fail, increasing the risk of accident.
- Remedy
- Recall of the product from end users
- Notes
- Notified by France
Airbags may not deploy in a collision
Damage to an internal component in the airbag triggering ECU may prevent an airbag from deploying, with no warning signs. Replace all affected ECUs as a precaution.
Official DVSA recall text
- Component
- AIRBAGS MAY NOT BE TRIGGERED IN THE EVENT OF A COLLISION
- Defect
- On the affected vehicles an internal component within the airbag triggering ECU may have been damaged which could lead to non deployment. There are no early warning signs or symptoms for the customer to indicate if the ECU is incorrect.
- Remedy
- The manufacturer has no simple method to check the internal component. Therefore all ECU's in affected vehicles to be changed as a precaution.
Engine may overheat
The engine cooling control strategy and temperature alert threshold could allow the engine to overheat, triggering a warning light and message. Engine management software will be updated to improve temperature control.
Official DVSA recall text
- Component
- ENGINE MAY OVERHEAT
- Defect
- The engine electronic cooling management control strategy and the maximum temperature alert threshold could cause the engine to overheat. This could result in a warning light and a message being displayed on the instrument panel.
- Remedy
- On affected vehicles download a new engine management software in order to modify the cooling management parameters to improve the control of the engine operating temperature.
Engine component may cause loss of performance
An engine component may be out of specification, causing loss of performance or stalling and potentially engine failure. In very unlikely circumstances, speed may increase briefly without warning. The engine will be checked and replaced if necessary.
Official DVSA recall text
- Component
- ENGINE COMPONENT MAY NOT BE TO SPECIFICATION
- Defect
- An engine component may not be to specification which could result in loss of engine performance. This may lead to the engine stalling and potentially causing an engine failure. In very unlikely circumstances the vehicle speed may increase without warning but will stop on its own after a few seconds.
- Remedy
- On affected vehicles carry out a functional diagnostic check of the engine. If necessary replace the engine.
Bonnet inner skin may detach
The bonnet inner skin may not be held securely and could vibrate, distort or detach. Additional adhesive will be applied between the skin and inner panel.
Official DVSA recall text
- Component
- BONNET SKIN MAY BECOME INSECURE
- Defect
- The bonnet inner skin may not be adequately retained. This may cause the bonnet to vibrate or distort. In extreme cases the skin could detach.
- Remedy
- On affected vehicles apply additional adhesive between the bonnet skin and its inner panel.
Starter motor wiring may short circuit
The starter supply terminal may be incorrectly positioned and foul other components, causing a short circuit. Its position will be checked and corrected if needed, and additional protection added.
Official DVSA recall text
- Component
- STARTER MOTOR SUPPLY WIRING HARNESS MAY BECOME DAMAGED
- Defect
- The positioning of the starter supply terminal may be incorrect. This may allow it to foul other components and cause a short circuit.
- Remedy
- On affected vehicles check the positioning of the terminaL. Correct it if necessary and add additional protection.
Starter motor relay may overheat
A faulty internal relay component may affect starter operation and cause the starter motor to overheat, with a fire risk in extreme cases. The relay will be checked and replaced if necessary.
Official DVSA recall text
- Component
- STARTER MOTOR MAY NOT OPERATE CORRECTLY
- Defect
- A possible nonconformity of an internal component of the starter motor relay could affect the control of the starter motor. This could adversely affect the starting operation and damage the starter motor due to overheating and in extreme cases there is a risk of fire.
- Remedy
- On affected vehicles check and where necessary replace the starter motor relay.
Front suspension bolts may break
Wishbone fixing bolts may not meet specification and could break, affecting the driver's ability to control the vehicle. The bolts will be replaced.
Official DVSA recall text
- Component
- FRONT SUSPENSION MAY FAIL
- Defect
- The front suspension wishbones fixing bolts may not be to the correct specification which could lead to a risk of them breaking. This may affetc the driver's ability to control the vehicle.
- Remedy
- On affected vehicles replace the wishbone fixing bolts.
Rear seat belt buckle strap may fail in a crash
A rear seat belt buckle strap may fail in an impact and not restrain the occupant correctly. The buckle batch numbers will be checked and affected buckles replaced where necessary.
Official DVSA recall text
- Component
- SEAT BELT BUCKLE STRAP MAY FAIL
- Defect
- The seat belt buckle fitted to the second row rear seat/s may have been damaged during the production process at the supplier. In the event of an impact the seat belt buckle strap could fail and not restrain the occupant correctly.
- Remedy
- Recall the vehicles that are likely to be affected to check the batch numbers and where necessary replace the seat belt buckle.
Door lock may jam or open unexpectedly
A door lock component defect may jam the mechanism and prevent a door from closing. In rare cases, a door could unlock and open unexpectedly. Dealers will check the locks and replace them if needed.
Official DVSA recall text
- Component
- DOOR MAY OPEN UNEXPECTEDLY
- Defect
- A manufacturing defect in one of the components of the door locks could cause jamming of the internal mechanism and prevent the closing of one or more of the vehicle's doors. In rare cases the door could unlock and open unexpectedly.
- Remedy
- On affected vehicles check and where necessary replace door locks.
Door lock may jam or open unexpectedly
A door lock component may jam and prevent a door from closing. In rare cases, a door could unlock and open unexpectedly. Door locks will be checked and replaced if necessary.
Official DVSA recall text
- Component
- DOOR MAY OPEN UNEXPECTEDLY
- Defect
- A manufacturing defect in one of the components of the door locks could cause jamming of the internal mechanism and prevent the closing of one or more of the vehicle's doors. In rare cases the door could unlock and open unexpectedly.
- Remedy
- On affected vehicles check and where necessary replace door locks.
Door lock may jam and door may open unexpectedly
A door lock component may jam and prevent a door from closing; in rare cases, a door could unlock and open unexpectedly. Door locks will be checked and replaced if necessary.
Official DVSA recall text
- Component
- DOOR MAY OPEN UNEXPECTEDLY
- Defect
- A manufacturing defect in one of the components of the door locks could cause jamming of the internal mechanism and prevent the closing of one or more of the vehicle's doors. In rare cases the door could unlock and open unexpectedly.
- Remedy
- On affected vehicles check and where necessary replace door locks.
Turbocharger oil leak may damage the engine
A faulty retaining bolt may cause an oil leak at the turbocharger lubrication union. Dealers will replace the bolt and seals.
Official DVSA recall text
- Component
- OIL LEAK MAY DAMAGE ENGINE
- Defect
- An oil leak could develop at the turbocharger lubrication union retaining bolt due to a non-conformity of this part.
- Remedy
- On affected vehicles replace the turbocharger lubrication union bolt and its seals.
Door locks may jam or unlock unexpectedly
A defect in a door lock may jam its mechanism, preventing the door from closing, or cause it to unlock and open unexpectedly. The affected locks will be checked and replaced if necessary.
Official DVSA recall text
- Component
- DOORS MAY OPEN UNEXPECTEDLY
- Defect
- A manufacturing defect of a component within any of the four door locks could result in jamming of the internal mechanism which prevents the closing of any of the vehicle's doors or risk unexpected unlocking and opening of the doors.
- Remedy
- Recall the vehicles that are likely to be affected to check and where necessary replace the affected door locks.
Fuel heater cover may distort and leak
A defective fuel filter heater may distort its cover, allowing air in and fuel out. This could cause poor starting and illuminate a warning light. The cover will be replaced and the connector checked and replaced if needed.
Official DVSA recall text
- Component
- FUEL MAY LEAK
- Defect
- The fuel filter's integrated heater may be defective and could cause the cover to distort. This could cause air ingress and fuel egress. Either could cause poor starting and a warning light should illuminate
- Remedy
- On affected vehicles replace fuel heater cover. Check and if necessary replace connector.
Power steering assistance may be reduced
A fault in the electric power steering control unit may reduce steering assistance while driving or manoeuvring. The remedy is to recall the product from end users.
Official EU Safety Gate text
- Component
- Injuries
- Defect
- null A problem with an internal component of the electric power steering electronic management device could result in a reduction in the steering assistance when driving or during manoeuvres.
- Remedy
- Recall of the product from end users
- Notes
- Notified by Portugal
Front suspension wishbone bolts may fail
Front suspension wishbone fixing bolts may be out of specification and fail, compromising the wishbones and potentially affecting directional control. The bolts will be replaced.
Official DVSA recall text
- Component
- POSSIBILITY OF LOSS OF CONTROL
- Defect
- The fixing bolts of the front suspension wishbones may not be to the correct specification. This could lead to the bolts failing and the security of the wishbones being compromised. If this occurs there is a possibility that the directional control of the vehicle could be adversely affected.
- Remedy
- Recall the vehicle that are likely to be affected and replace all the fixing bolts of the front suspension wishbones.
Reverse gear locking collar may cause wrong gear selection
A locking collar that does not meet specification may cause the wrong gear to be selected. The collar will be replaced.
Official DVSA recall text
- Component
- THE INCORRECT GEAR MAYBE SELECTED
- Defect
- It has been identified that the reverse gear locking collar on the gear lever may not have been manufacturered to specification. This could result the incorret selection of gears.
- Remedy
- Recall all affected vehicles to replace the locking collar.
Fuel rail pipes may leak and create a fire risk
High-pressure fuel rail pipes may not be tightened to specification, causing fuel to leak onto the engine. Vapour contacting a hot component could cause an engine bay fire. The pipes will be retightened to specification.
Official DVSA recall text
- Component
- FUEL MAY LEAK AND CREATE FIRE RISK
- Defect
- It has been established that the high pressure fuel rail pipes on the engine have not been torqued to the correct specification. This can result in poor sealing of the rail which can cause as fuel leak onto the engine. If the vaporised fuel comes into contact with a hot engine component there can be a risk of an engine bay fire.
- Remedy
- Recall all the affected vehicles and retorque the high pressure fuel rail pipes.
Starter motor wiring may wear and cause a fire
The starter motor wiring harness may wear over time from rubbing, causing electrical problems or, in the worst case, a fire. Additional protection will be fitted to the harness.
Official DVSA recall text
- Component
- RISK OF FIRE
- Defect
- The starter motor wiring harness may be subject to long term wear due to rubbing. This can cause electrical problems or in the worst case a fire.
- Remedy
- Recall the vehicles that are likely to be affected to add further protection to the starter motor wiring harness.
Front seatbelt fixing bolts may loosen or break
The front seatbelt return rail fixing bolts may loosen and, under extreme force, break. The bolts on both sides will be replaced.
Official DVSA recall text
- Component
- SEAT BELT FIXING BOLTS MAY LOOSEN
- Defect
- The fixing bolts of the front LH and RH seat belt return rail may loosen and in cases of extreme force break.
- Remedy
- The bolts on the left and right- hand sides will be replaced.
Electric parking brake cable may not apply enough force
A faulty operating cable may cause the electric parking brake to apply insufficient force, leaving only one wheel operating or locked. A warning lamp and message will appear. Dealers will inspect and repair or replace the cable if required.
Official DVSA recall text
- Component
- ELECTRIC PARKING BRAKE MAY MALFUNCTION
- Defect
- It has been identified that due to a nonconformity in one of the operating cables of the Electric Parking Brake (FSE) it is possible that insufficient application (force) will be applied. This could result in only one wheel operating or locked. The driver however will receive warning of the issue by the illumination of the Parking Brake Warning Lamp on the instrument panel along with a message on the multifuction screen.
- Remedy
- Recall all affected vehicles for inspection repair or if required the replacement of the cable.
Fuel return pipe may chafe and leak
The fuel return pipe may rub against the diesel filter support and develop a fuel leak. A protective sleeve will be fitted to the pipe.
Official DVSA recall text
- Component
- FUEL MAY LEAK
- Defect
- It is possible that the fuel return pipe may chaff on the diesel fuel filter support in the engine compartment. This can if not identified result in a fuel leak.
- Remedy
- Recall all affected vehicles for the addition of a protective sleeve to the return pipe.
Front seat belt may not lock correctly
A front seat belt may not lock correctly in its buckle, leaving the occupant insufficiently restrained in a violent impact. The locking mechanism will be checked and repaired if needed.
Official DVSA recall text
- Component
- FRONT SEAT BELT MAY NOT LOCK CORRECTLY
- Defect
- The front seat belts may not lock in the buckles correctly which will have the affect of the front passengers not being sufficiently restrained in the case of a violent impact.
- Remedy
- Recall the vehicles that are likely to be affected to check and where necessary repair the seat belt locking mechanism.
Engine relay unit may cause equipment faults
An incorrect engine relay unit may deteriorate and cause operating faults or failure of some equipment. The unit will be checked and replaced if it is not to the correct specification.
Official DVSA recall text
- Component
- WIPERS / LIGHTS/ BATTERY CHARGING MAY BE AFFECTED.
- Defect
- An incorrect engine relay unit may have been fitted. This ECU could deteriorate and cause operating faults and perhaps failure of certain equipment
- Remedy
- Recall affected vehicles check Engine Relay Unit and replace if not correct specification.
Parking brake may not hold on steep gradients
A cable production fault may prevent the parking brake from holding the vehicle securely on a steep gradient. The cables will be checked and replaced if needed.
Official DVSA recall text
- Component
- PARKING BRAKE MAY BE INEFFECTIVE
- Defect
- It has been identified that due to a production non conformity in one of the electric parking brake cables the brake may not hold the vehicle securely on a steep gradient when the parking brake is applied. This will be accompanied by the illumination of the warning lamp and a message saying parking brake faulty on the multifunction screen.
- Remedy
- Recalled vehicle swill have the conformity of the cables checked and replaced as necessary.
Front brake caliper fixing screws may loosen
The front brake caliper fixing screws may not meet the required standard and could loosen. They will be replaced with approved screws.
Official DVSA recall text
- Component
- FRONT BRAKE CALIPER MAY BECOME INSECURE
- Defect
- The front brake caliper fixing screws are not to standard (non - conforming) and may slacken
- Remedy
- Recall affected vehicles and replace fixing screws with approved type.
Panoramic roof moulding may detach
Incorrect bonding may cause the glass panoramic roof moulding to partly release and become visible to the driver; over time it could detach. The bonding will be checked and the moulding replaced if necessary.
Official DVSA recall text
- Component
- RISK OF PARTIAL DE-BONDING OF GLASS PANORAMIC ROOF MOULDING.
- Defect
- It has been identified that in the event of incorrect bonding there is a risk of the partial release of the glass panoramic roof moulding such that it becomes visible to the driver. If the concern is not rectified in the long term; the moulding could detach. It should be noted that there is no risk to the integrity of the sealing of the affected area.
- Remedy
- Recalled vehicles will have the bonding of the moulding checked and replaced as necessary.
Brake assistance may be reduced
A defective check valve in the brake vacuum pump may reduce braking assistance over time. The valve will be replaced; some vehicles will also have the air dosing unit replaced.
Official DVSA recall text
- Component
- VACUUM BRAKING ASSISTANCE MAY REDUCE.
- Defect
- It has been identified that the check valve within the brake assistance vacuum pump may suffer from a non-conformity which in time may reduce the braking assistance.
- Remedy
- Recalled vehicles as a preventative measure will have the subject valve replaced. At the same time certain vehicles will also have the air dosing unit replaced.
Front seat belt may provide reduced restraint
In very rare cases and under certain impact conditions, the front seat belt may provide less restraint. The front seat belt buckles will be replaced as a precaution.
Official DVSA recall text
- Component
- SEAT BELT MAY FAIL IN A COLLISION
- Defect
- It has been identified that on some vehicles fitted with electrically controlled seats in very rare cases and under certain impact conditions the front seatbelt may provide a diminished level of restraint.
- Remedy
- As a preventative measure subject vehicles will have the front seatbelt buckles replaced.
Sources: NHTSA (US National Highway Traffic Safety Administration), DVSA (UK Driver and Vehicle Standards Agency) and the EU Safety Gate (European Commission) recall data. Each recall covers vehicles sold in that market; models sold elsewhere may differ.