OBD-II fault code

B0097: Right Side Restraints Sensor 2 (Subfault)

What it means

The right rear side impact sensor is reporting a malfunction or implausible signal.

How it works

Right side restraints sensor 2 is identified as a rear side-impact sensor and reports crash-related information to the restraint control module. B0097 indicates that this sensor is reporting a malfunction or implausible input; the precise failure mode depends on the vehicle's SRS diagnostics.

Common causes

Most likely first.

  1. Sensor failure
  2. Corroded sensor connector

Symptoms

  • Warning light or symbol related to the affected system
  • Comfort or safety function impaired

How to diagnose it

  1. Read the SRS module with a compatible scan tool, confirm B0097, and note whether the fault is current or stored with event data.
  2. Use service information to identify the right rear sensor 2 location and inspect its mounting area for damage or movement.
  3. Following the vehicle's SRS disable procedure, inspect the sensor connector for corrosion, looseness, damaged pins, or moisture.
  4. Check the accessible wiring from right rear sensor 2 for rubbing, breaks, or poor connections, then test the circuit using the manufacturer's procedure.
  5. If the circuit is sound, test the sensor's reported signal and module connection as directed by the manufacturer.

Common fixes

  • Reconnect and secure the right rear sensor 2 connector.
  • Repair corroded terminals or damaged wiring in its circuit.
  • Correct any damaged or loose sensor mounting.
  • Replace the sensor if it fails the manufacturer's diagnostic test.

Can I keep driving?

The affected side-impact protection may not operate as intended in a collision. Limit driving to what is necessary until the SRS fault is diagnosed, and avoid handling the sensor or its wiring without the prescribed safety steps.

A code shows where the control module detected a fault, not always which part failed. Check the causes in order and confirm with a test before replacing parts. Have several codes? Check them together

This is a generic code: it means the same on every make. The car’s maker may add more detail in its own service information.

Codes for the same component

Nearby codes