OBD-II fault code

B002A: Right Curtain Deployment Control 2

What it means

Fault on the second deployment circuit of the right side curtain airbag. Curtain airbags deploy along the side glass to protect head and neck in a side or rollover crash.

At a glance

  • Usually lights the airbag (SRS) or body-system warning light

How it works

The restraint control module monitors deployment circuit 2 for the right curtain airbag, which protects occupants beside the right-side glass. B002A indicates an electrical fault in that specific circuit, such as excessive resistance or an open; the scan-tool subfault detail can narrow the condition.

Common causes

Most likely first.

  1. Open or high resistance in the right curtain airbag inflator circuit
  2. Damaged wiring or connector along the roof or pillar
  3. Loose or corroded connector
  4. Fault in the restraint control module

Symptoms

  • Warning light or symbol related to the affected system
  • Comfort or safety function impaired

How to diagnose it

  1. Read the SRS subfault and freeze-frame data to confirm the fault is for right curtain circuit 2 and note whether it is current or intermittent.
  2. Inspect accessible roof-rail and pillar wiring and connectors on the right side for pinching, corrosion, looseness, or damage from trim work.
  3. Follow the vehicle's SRS disabling procedure before handling connectors, then check the circuit connections without probing the inflator terminals directly.
  4. Use the manufacturer's approved SRS test method to check circuit 2 for an open, high resistance, or short and compare results with specification.
  5. If the wiring passes, check the right curtain module and restraint control module using the specified diagnostic procedure, then clear and rescan the code.

Common fixes

  • Reconnect or repair a loose or damaged right roof-rail or pillar harness connection using the approved SRS procedure.
  • Repair an open or high-resistance section of right curtain circuit 2 according to the manufacturer's wiring repair instructions.
  • Replace the right curtain airbag module if its circuit is confirmed faulty.
  • Repair or replace the restraint control module only after circuit and inflator checks pass.

Can I keep driving?

The right curtain airbag may not deploy correctly, reducing head protection in a side impact or rollover. Arrange prompt repair and drive cautiously; this SRS fault does not itself mean the vehicle's engine is unsafe to run.

A code shows where the control module detected a fault, not always which part failed. Check the causes in order and confirm with a test before replacing parts. Have several codes? Check them together

This is a generic code: it means the same on every make. The car’s maker may add more detail in its own service information.

Codes for the same component

Nearby codes