Vauxhall Frontera recalls

4 official safety recalls for the Vauxhall Frontera from NHTSA (United States), DVSA (United Kingdom) and the EU Safety Gate, newest first. Recall repairs are normally free at the maker’s dealers.

Whether your car is affected and still needs the repair depends on its VIN or registration. Check it on the official site for your country:

  1. Alternator protection cap may contact filter pipe

    Reported March 9, 2026Model years 2024–2025DVSA recall R/2026/0724,479 vehicles affected

    Contact between the gasoline particulate filter pipe and the 48V belt starter generator protection cap may allow water in and cause an electrical arc, potentially triggering a thermal event. The cap will be replaced, and the pipe checked and repositioned or replaced if needed.

    Official DVSA recall text
    Component
    Alternator protection
    Defect
    Affected vehicles may have been assembled with contact or with a reduced clearance between the Gasoline Particulate Filter pipe and the pole protection cap of the 48V Belt Starter Generator. There is a possibility of contact between these components leading to water infiltration and an electrical arch which could trigger a thermal event.
    Remedy
    Replace the pole protection cap of the 48V Belt Starter Generator. Check the distance between the Gasoline Particulate Filter pipe and the pole protection cap of the 48V Belt Starter Generator and re‑position or replace the pipe if required.

  2. Front camera calibration may be incorrect

    Reported March 6, 2026Model years 2025DVSA recall R/2025/545101 vehicles affected

    Incorrect front camera calibration may mean the speed limit indication system does not meet regulatory requirements. The central vehicle management software will be updated.

    Official DVSA recall text
    Component
    SLI disconnection to server “Here” not monitored.
    Defect
    On affected vehicles the front camera module calibration may be incorrect which may lead to non-compliance with the speed limit indication system regulatory requirement.
    Remedy
    Update the central vehicle management software.

  3. Brake pedal bracket pin may be missing or incorrectly fitted

    Reported November 21, 2025Model years 2025DVSA recall R/2025/5132,380 vehicles affected

    A missing or incorrectly assembled pin may leave the brake pedal bracket connection insufficient. If the pin falls out, the brake pedal may disengage. The connection will be checked and corrected if needed.

    Official DVSA recall text
    Component
    Vauxhall Frontera Brake Pedal Bracket Connection.
    Defect
    On affected vehicles there may be an insufficient brake pedal bracket connection due to a missing or incorrectly assembled pin. If the pin falls out the brake pedal will potentially disengage.
    Remedy
    Check the brake pedal connection confirm proper assembly and rework it if necessary.

  4. Brake bar weld may break, causing loss of braking

    Reported September 2, 2025Model years 2025DVSA recall R/2025/362353 vehicles affected

    The brake bar weld may break, causing complete loss of braking. There is currently no remedy. Do not drive the vehicle; the repairer will arrange replacement mobility.

    Official DVSA recall text
    Component
    Frontera Risk of Brake Bar Welding Breakage
    Defect
    On affected vehicles there is a risk of the brake bar welding breaking leading to a complete loss of braking.
    Remedy
    Currently there is no determined remedy. You are advised not to drive the vehicle. The repairer will arrange a replacement mobility solution.

Sources: NHTSA (US National Highway Traffic Safety Administration), DVSA (UK Driver and Vehicle Standards Agency) and the EU Safety Gate (European Commission) recall data. Each recall covers vehicles sold in that market; models sold elsewhere may differ.

Back to the Vauxhall Frontera