Suzuki Wagon R recalls
7 official safety recalls for the Suzuki Wagon R from NHTSA (United States), DVSA (United Kingdom) and the EU Safety Gate, newest first. Recall repairs are normally free at the maker’s dealers.
Whether your car is affected and still needs the repair depends on its VIN or registration. Check it on the official site for your country:
- United States: nhtsa.gov/recalls
- United Kingdom: check-vehicle-recalls.service.gov.uk
Driver airbag may not deploy in a frontal collision
The driver airbag may not deploy in a frontal collision because the passenger airbag pigtail is not to specification. The passenger airbag pigtail will be replaced.
Official DVSA recall text
- Component
- AIRBAG MAY NOT FUNCTION TO SPECIFICATION
- Defect
- The drivers airbag may not deploy in the case of a frontal collision. This because the passenger airbag pigtail is not to specification.
- Remedy
- Recall the vehicles that are likely to be affected to replace the passenger airbag pigtail.
Fuel tank corrosion may cause a leak
Poor adhesion of the fuel tank's protective coating may lead to corrosion and a fuel leak. The tank will be checked and, depending on the corrosion, given additional protection or replaced.
Official DVSA recall text
- Component
- FUEL MAY LEAK
- Defect
- The protection coating on the vehicles fuel tank has insufficient adhesion this could cause delamination of the coating from the underlying coating. This could result in corrosion of the fuel tank and if not rectified could result in a fuel leak.
- Remedy
- Recall all affected vehicles to check the fuel tank. Depending on the tank is corroded or not and the extent of the corrosion the tank will either receive additional corrosion protection or a replacement tank.
Gearshift cable may break
The manual transmission gearshift cable may break, preventing the driver from selecting or changing gears. The gearshift cable will be replaced.
Official DVSA recall text
- Component
- THE GEARSHIFT CABLE MAY BREAK WHILST IN SERVICE
- Defect
- The manual transmission gearshift control cable may break due to a lack of maximum strength and durability. This will result in the inability of the driver to either select or de-select the gears.
- Remedy
- Recall likely to be affected vehicles and replace the gearshift cable.
Front suspension fasteners may be undertightened
Front suspension fasteners may not have been tightened correctly. Loosen and retighten them to the specified torque.
Official DVSA recall text
- Component
- FRONT SUSPENSION FASTNERS MAY NOT BE TO THE CORRECT TORQUE
- Defect
- Vehicles may have been produced with the front suspension fastenings incorrectly tightened.
- Remedy
- Affected vehicles will be recalled during which time the subject fastenings will be slackened off and then re-torqued.
Incorrect front shock absorbers may be fitted
Front shock absorbers may not be to the correct specification. They will be replaced with correctly specified units.
Official DVSA recall text
- Component
- INCORRECT SPECIFICATION SHOCK ABSORBERS FITTED TO FRONT SUSPENSION
- Defect
- The incorrect specification shock absorbers may have been fitted during manufacture
- Remedy
- Recall affected vehicles and replace the incorrect shock absorbers with correctly specified units.
Handbrake may release by itself
The handbrake pawl may not rotate freely or engage the ratchet, allowing the handbrake to slip off. Fit a quality-assured replacement handbrake assembly where necessary.
Official DVSA recall text
- Component
- HANDBRAKE MAY SELF RELEASE
- Defect
- The handbrake lever pawl may not rotate freely. When the handbrake is applied the pawl may not engage the ratchet and the handbrake can slip off.
- Remedy
- Recall affected vehicles and fit a quality assured replacement handbrake assembly where necessary.
Steering, suspension or engine mount fasteners may loosen
Fasteners on the steering rack, rear suspension or near-side engine mounting may not be tight enough, allowing components to detach while driving. The fasteners will be tightened to the correct torque where needed.
Official DVSA recall text
- Component
- SECURITY OF STEERING RACK REAR SUSPENSION AND ENGINE MOUNTING FASTENERS
- Defect
- Fasteners on the steering rack rear suspension and near-side engine mounting may not have been tightened to the correct torque. It is possible that these components may become detached during use.
- Remedy
- Recall the affected vehicles and tighten fasteners to correct torque where necessary.
Sources: NHTSA (US National Highway Traffic Safety Administration), DVSA (UK Driver and Vehicle Standards Agency) and the EU Safety Gate (European Commission) recall data. Each recall covers vehicles sold in that market; models sold elsewhere may differ.