Suzuki Jimny recalls
8 official safety recalls for the Suzuki Jimny from NHTSA (United States), DVSA (United Kingdom) and the EU Safety Gate, newest first. Recall repairs are normally free at the maker’s dealers.
Whether your car is affected and still needs the repair depends on its VIN or registration. Check it on the official site for your country:
- United States: nhtsa.gov/recalls
- United Kingdom: check-vehicle-recalls.service.gov.uk
Fuel pump impeller may cause pump failure
The fuel feed impeller may interfere with the pump housing, causing the fuel pump to malfunction. Replace the fuel pump.
Official DVSA recall text
- Component
- Jimny Fuel Pump Replacement
- Defect
- The fuel feeding impeller may interfere with the fuel pump housing resulting in the fuel pump malfunction
- Remedy
- Replace the fuel pump fitted to affected vehicles
Door wiring harnesses may affect airbag operation
Improperly designed driver-side and passenger-side door wiring harnesses may affect airbag operation. The affected door harnesses will be replaced.
Official DVSA recall text
- Component
- IMPROPER DESIGN OF THE DRIVER SIDE AND THE PASSENGER SIDE DOOR HARNESSES MAY AFFECT AIR BAG OPERATION
- Defect
- Improper design of the driver side and the passenger side door harnesses may affect air bag operation..
- Remedy
- Replace the door harnesses of the affected vehicles.
Fuel pump impeller may swell and deform
The fuel pump impeller may swell and deform. The fuel pump will be replaced.
Official DVSA recall text
- Component
- THE FUEL FEEDING IMPELLER IN THE FUEL PUMP MAY BE SWOLLEN AND DEFORMED
- Defect
- The fuel feeding impeller in the fuel pump may be swollen and deformed.
- Remedy
- Replace fuel pump.
Brake servo booster may reduce braking performance
A manufacturing fault in the brake servo booster may make the brake pedal harder to operate, requiring more effort from the driver. The brake servo booster will be replaced.
Official DVSA recall text
- Component
- BRAKING PERFORMANCE MAY BE REDUCED
- Defect
- The brake servo booster may not have been correctly manufactured. This may cause a harder feel to the brake pedal operation and require more effort from the driver.
- Remedy
- Replace Brake Servo Booster on affected vehicles.
Resin fragments may delay ABS and stability control
Resin fragments in the stability control unit may cause its valves to stick and delay ABS or stability control operation. The unit will be replaced.
Official DVSA recall text
- Component
- LOSS OF STABILITY
- Defect
- Small resin fragments may have been left in the Electronic Stability Control unit during production. These fragments may cause the ESC valves to stick and delay operation of the ABS/ESC systems.
- Remedy
- Replace the ESC unit.
Axle rod bolts may loosen and fall out
A bolt securing the lateral rods to an axle may wear and fall out, allowing the axle to tramp and reducing steering effort. The bolts will be replaced with a modified version.
Official DVSA recall text
- Component
- STEERING EFFORT MAY DECREASE
- Defect
- A bolt securing lateral rods to the front and rear axles may become loose and cause a vibration through the steering wheel. These rods act as an anti tramp measure. If the bolt wears it can drop out allowing the axle to tramp and cause the steering effort applied by the driver to reduce.
- Remedy
- Replace bolts on affected vehicles with modified version
Power steering tensioner pulley may fail
The tensioner pulley may fail and cut drive to the hydraulic pump, causing a loss of steering assistance. The pulley will be inspected and replaced if necessary.
Official DVSA recall text
- Component
- LOSS OF STEERING ASSISTANCE.
- Defect
- Steering assistance may be lost because the power steering tensioner pulley material is not to specification. The pulley may fail and cause a loss of drive to the hydraulic pump.
- Remedy
- Recall the vehicles that are likely to be affected to inspect and where necessary replace the power steering tensioner pulley.
Gear selector yoke bolt may loosen
The bolt securing the gear selector yoke may loosen and fall out, detaching the yoke and making it impossible to select a gear. Fit a higher tensile bolt and tighten it to a higher torque specification.
Official DVSA recall text
- Component
- GEARBOX SELECTOR YOKE CONCERN
- Defect
- The bolt securing the gear selector yoke to the gear selector shaft may loosen and fall out. This will allow the gear selector yoke to become detached from the selector shaft. In this event it will not be possible to select gear.
- Remedy
- Fit a higher tensile bolt to the gear selector yoke and tighten it to a higher torque specification.
Sources: NHTSA (US National Highway Traffic Safety Administration), DVSA (UK Driver and Vehicle Standards Agency) and the EU Safety Gate (European Commission) recall data. Each recall covers vehicles sold in that market; models sold elsewhere may differ.