SEAT Mii recalls
5 official safety recalls for the SEAT Mii from NHTSA (United States), DVSA (United Kingdom) and the EU Safety Gate, newest first. Recall repairs are normally free at the maker’s dealers.
Whether your car is affected and still needs the repair depends on its VIN or registration. Check it on the official site for your country:
- United States: nhtsa.gov/recalls
- United Kingdom: check-vehicle-recalls.service.gov.uk
Towing eye weld may fail
The towing eye in the tool kit may detach if used to tow the vehicle because its weld may fail. It will be replaced with an improved version.
Official DVSA recall text
- Component
- TOWING EYE MAY BE DEFETCIVE
- Defect
- The welding of the towing eye in the vehicle tool kit may not be fail-proof and may detach if the vehicle is towed.
- Remedy
- On affected vehicles replace the towing eye with an improved version.
Sunroof front trim may detach
The sunroof front trim may not be securely attached and could come off, posing a risk to following traffic. The product is recalled from end users.
Official EU Safety Gate text
- Component
- Injuries
- Defect
- null The front trim of the sun roof may not be securely stuck down. As a result, the sun roof's front trim frame could become detached posing a risk to following traffic.
- Remedy
- Recall of the product from end users
- Notes
- Notified by Spain
Manual child lock may disengage without warning
The child lock may disengage without the driver knowing, allowing the door to be opened from inside. The manual child lock will be checked and the door lock replaced if necessary.
Official DVSA recall text
- Component
- MANUAL CHILD LOCK MAY DISENGAGE WITHOUT WARNING
- Defect
- The child lock can disengage without the driver knowing and the door can again be opened from the inside. If children leave the car unnoticed and run into the road there is a risk of accident.
- Remedy
- Recall the vehicles that are likely to be affected and check the function of the manual child lock. If necessary the door lock/s will be replaced.
Driver airbag may not deploy correctly
A faulty weld in the gas generator may limit driver airbag protection if it deploys, increasing the risk of injury. The driver's airbag will be replaced.
Official DVSA recall text
- Component
- DRIVER'S AIRBAG MAY NOT DEPLOY CORRECTLY
- Defect
- The driver's air bag may not correctly deploy because of a faulty welding process on the gas generator. In an air bag deployment the effect of the faulty welding process is to limit the protection and thereby increase the risk of injury.
- Remedy
- Recall the vehicles that are likely to be affected and replace the driver's air bag.
Side airbag fault may go undetected
Incorrect airbag control unit settings can disable side crash sensor diagnostics, so faults may go unrecognised and the airbag warning may not illuminate. The control unit will be reprogrammed.
Official DVSA recall text
- Component
- SIDE AIRBAG DIAGNOSTIC FUNCTION DISABLED
- Defect
- Some vehicles may be fitted with airbag control units with incorrect parameters programmed. On these vehicles the diagnostic function for the side crash sensors is deactivated resulting in potential faults not being recognised and the airbag warning not illuminating.
- Remedy
- Recall the vehicles that are likely to be affected to re programme the airbag control unit.
Sources: NHTSA (US National Highway Traffic Safety Administration), DVSA (UK Driver and Vehicle Standards Agency) and the EU Safety Gate (European Commission) recall data. Each recall covers vehicles sold in that market; models sold elsewhere may differ.