Jeep Avenger recalls

10 official safety recalls for the Jeep Avenger from NHTSA (United States), DVSA (United Kingdom) and the EU Safety Gate, newest first. Recall repairs are normally free at the maker’s dealers.

Whether your car is affected and still needs the repair depends on its VIN or registration. Check it on the official site for your country:

  1. Brake system fault may reduce vehicle control

    Reported August 6, 2026Model years 2024DVSA recall R/2025/2761 vehicle affected

    The electronic stability control warning may appear and the system may deactivate. Without electronic brake-force distribution and anti-lock braking, the vehicle could lose controllability when braking. The electronic brake system module will be replaced.

    Official DVSA recall text
    Component
    Electronic Brake System (EBS) module
    Defect
    On some vehicles the Electronics Stability Control (ESC) warning light and the relative warning message may appear on the Instrument Panel Cluster (IPC) and the ESC may deactivate. In the worst case the vehicle could lose controllability when braking due to Electronic Brake-force Distribution (EBD) and Anti-lock Braking System (ABS) not being available.
    Remedy
    Replace the Electronic Brake System (EBS) Module.

  2. Fuel particulate filter pipe may cause an electrical arc

    Reported April 6, 2026Model years 2023–2026DVSA recall R/2026/114EU Safety Gate SR/00844/264,966 vehicles affected

    Insufficient clearance between the fuel particulate filter pipe and the 48V belt starter generator pole protection cup may allow water in, causing an electrical arc and overheating or fire in the engine compartment. The cup will be replaced; the clearance will be checked and the pipe repositioned or replaced if damaged.

    Official DVSA recall text
    Component
    Fuel particulate filter pressure pipe
    Defect
    On affected vehicles due to a production nonconformity there may be contact or a reduced clearance between the fuel Particulate Filter pipe and the pole protection cup of the 48V Belt Starter Generator. Under wet conditions there is a possibility that this insufficient clearance may lead to water infiltration creating an electrical arc which could trigger a thermal event such as overheating. In the worst-case scenario this could result in a risk of fire in the engine compartment.
    Remedy
    Replace the pole protection cup of the 48V Belt Starter Generator. In addition check the distance between the fuel Particulate Filter pipe and the pole protection cup of the 48V Belt Starter Generator. If the distance is less than 10 mm re-position the pipe or replace the pipe if damaged.

  3. Brake pedal may disengage

    Reported December 22, 2025Model years 2025DVSA recall R/2025/518211 vehicles affected

    A production issue may affect the brake pedal bracket connection, creating a risk that the pedal could disengage. The connection will be checked for the assembly clip and reworked if necessary.

    Official DVSA recall text
    Component
    Jeep Avenger 2025. Brake pedal
    Defect
    On affected vehicles due to a production nonconformity there is a requirement to inspect the brake pedal bracket connection and if necessary perform a rework to eliminate any potential risk of brake pedal disengagement. In the event of brake pedal failure the Electronic Park Brake located on the centre console can be applied while driving to bring the vehicle to a controlled stop. Additionally when active the Automatic Emergency Braking system will intervene if it detects an imminent collision.
    Remedy
    Check for the presence of the clip confirming correct assembly and reworking it if necessary.

  4. Stop&Start may not switch off the engine

    Reported November 5, 2025Model years 2024–2025DVSA recall R/2025/376EU Safety Gate SR/03880/252,833 vehicles affected

    Incorrect body control module software may prevent Stop&Start from activating, so the engine keeps running when it should stop. This may increase CO2 emissions and cause non-compliance with emissions regulations. A retailer will update the module software to rectify the issue.

    Official DVSA recall text
    Component
    Jeep Avenger. Emissions recall. Stop&Start not functioning software update. r Switch Harness Failure
    Defect
    On a number of Jeep Avenger ICE (internal combustion engine) vehicles equipped with start/stop function and manual transmission the Stop&Start function may not activate correctly. This will result in the engine continuing to run when Stop&Start should be active not shutting off as Stop&Start is intended. This is due to incorrect BCM (body control module) coding software and therefore CO2 levels may increase which does not match the CO2 values homologated and displayed in the CoC (Certificate of Conformity). This can lead to non-compliance with emissions regulations.
    Remedy
    The repair is the Jeep retailer will update the BCM with the latest software to permanently rectify the issue. Jeep ref: 36C.

  5. Vehicle control unit software may not meet emissions requirements

    Reported October 23, 2025Model years 2023–2024DVSA recall R/2025/3371,682 vehicles affected

    The vehicle may not comply with emissions test requirements. A dealer will update the electric vehicle control unit software to rectify the issue.

    Official DVSA recall text
    Component
    Jeep Avenger BEV. Emissions recall eVCU (vehicle control unit) software update.
    Defect
    A number of Jeep Avenger BEV vehicles may not comply with emissions test requirements conducted by the relevant authorities. This may lead to a non-compliance of regulatory requirements.
    Remedy
    The repair is the Jeep dealer will update the eVCU (electric vehicle control unit) with the latest software to permanently rectify the issue. Jeep ref: 17C.

  6. High-pressure fuel pipe connections may leak

    Reported August 21, 2025Model years 2024–2025DVSA recall R/2025/303EU Safety Gate SR/02931/253,561 vehicles affected

    Fuel may leak at the high-pressure fuel pipe and rail connections, which could cause a vehicle fire. The connections will be checked and tightened.

    Official DVSA recall text
    Component
    Jeep Avenger fuel pipe
    Defect
    On affected vehicles there is a risk of a fuel leak at the high-pressure fuel pipe and rail connections which in a worst-case could result in a vehicle fire.
    Remedy
    Check and tighten high-pressure fuel pipe and rail connections.

  7. Steering rack may cause heavy or locked steering

    Reported December 17, 2024Model years 2024DVSA recall R/2024/41736 vehicles affected

    A steering rack that does not meet specification may make the steering harder to turn or, in the worst case, cause it to lock and lead to a crash. The steering rack will be replaced.

    Official DVSA recall text
    Component
    Jeep Avenger Steering gear pinion safety recall
    Defect
    Affected vehicles may have been fitted with a steering rack which does not conform to specification. This can lead to the need for increased force to rotate the steering wheel and in a worst-case scenario the steering may lock causing a crash.
    Remedy
    Replace the steering rack.

  8. Front camera fault may disable driver assistance

    Reported November 21, 2024Model years 2024DVSA recall R/2024/4312 vehicles affected

    An incorrect front camera hardware level may trigger a system error and leave the driver assistance system inactive. The front camera will be replaced.

    Official DVSA recall text
    Component
    Jeep Avenger all models 2023-2024. Front camera
    Defect
    Affected vehicles have been equipped with a front camera with an incorrect hardware level ID causing an error code within the car system resulting in ADSA system remaining inactive.
    Remedy
    Replace the front camera.

  9. Emergency braking and lane assist may deactivate

    Reported October 29, 2024Model years 2024DVSA recall R/2024/395130 vehicles affected

    Active emergency braking and lane keep assist may deactivate at the same time, so the vehicle may not meet regulatory requirements. Updated software will be installed.

    Official DVSA recall text
    Component
    2023-24 Jeep Avenger BEV Advanced Driver Assistance Systems
    Defect
    On affected vehicles equipped with an Advanced Driver Assistance System (ADAS) functionality the AEB/LKA (Active Emergency Brake/Lane Keep Assist) can be deactivated simultaneously. The vehicle does not therefore meet regulatory requirements.
    Remedy
    Install updated software.

  10. High-voltage battery may lack homologation label

    Reported December 18, 2023Model years 2022–2023DVSA recall R/2023/327130 vehicles affected

    The high-voltage battery may be missing its homologation label. The missing label will be fitted.

    Official DVSA recall text
    Component
    High voltage battery homologation label
    Defect
    On affected vehicles the High Voltage (HV) battery may be missing the homologation label.
    Remedy
    Fitment of missing homologation label to HV battery.

Sources: NHTSA (US National Highway Traffic Safety Administration), DVSA (UK Driver and Vehicle Standards Agency) and the EU Safety Gate (European Commission) recall data. Each recall covers vehicles sold in that market; models sold elsewhere may differ.

Back to the Jeep Avenger