Citroën C-Zero recalls
10 official safety recalls for the Citroën C-Zero from NHTSA (United States), DVSA (United Kingdom) and the EU Safety Gate, newest first. Recall repairs are normally free at the maker’s dealers.
Whether your car is affected and still needs the repair depends on its VIN or registration. Check it on the official site for your country:
- United States: nhtsa.gov/recalls
- United Kingdom: check-vehicle-recalls.service.gov.uk
Passenger airbag inflator may rupture
The airbag inflator may deteriorate and rupture with excessive force in a crash, potentially causing serious injury or death. The passenger airbag module will be replaced. Do not drive the vehicle.
Official DVSA recall text
- Component
- Citroen C- zero Passenger Airbag Takata.
- Defect
- On affected vehicles the Takata airbag inflators may deteriorate over time. This may cause some inflators to rupture with too much force in a crash capable of causing serious injury or death in a worst-case scenario.
- Remedy
- Replace Passenger Airbag module. You are advised not to drive the vehicle.
Water may corrode the brake vacuum pump
Water may enter the brake vacuum pump and cause corrosion. The brake vacuum pump will be replaced.
Official DVSA recall text
- Component
- WATER MAY PENETRATE INTO THE BRAKE VACUUM PUMP CAUSING CORROSION
- Defect
- Water may penetrate into the brake vacuum pump causing corrosion.
- Remedy
- Replace the brake vacuum pump.
Vacuum pump fault may reduce brake assistance
A defective component in the brake assist vacuum pump may reduce braking assistance and increase stopping distance, possibly leading to an accident. The product is recalled from end users.
Official EU Safety Gate text
- Component
- Injuries
- Defect
- Possible defective component in the brake assist system vacuum pump. This may cause a loss of braking assistance and increased braking distance, possibly leading to an accident.
- Remedy
- Recall of the product from end users
- Notes
- Notified by France
Passenger airbag may not deploy correctly
A passenger airbag triggering module component may not meet specifications and could affect deployment in a crash. The passenger airbag assembly will be replaced.
Official DVSA recall text
- Component
- A NON-CONFORMITY IN AN INTERNAL COMPONENT COULD AFFECT DEPLOYMENT OF THE PASSENGER AIRBAG
- Defect
- An internal component of the passenger's airbag triggering module may not conform to specification. This could affect the triggering of the device in the event of an impact.
- Remedy
- On affected vehicles replace the passenger's air bag assembly
Engine control unit may prevent restart
A manufacturing issue may make the engine control unit’s motor circuit voltage unstable, illuminating a warning light and restricting motor power. The vehicle may not restart or the battery may not charge. The engine control unit will be replaced.
Official DVSA recall text
- Component
- ENGINE MAY NOT START
- Defect
- Due to none conformity during manufacture the resistance of the insulated base inside the Engine Control Unit (ECU) which controls the electric motor may decrease. As a result the voltage in the circuit may become unstable causing the warning light to illuminate and the driving motor power to be restricted to the fail safe control. In the worst case scenario the vehicle may not be able to be restarted and the battery may not be able to be charged.
- Remedy
- Recall the vehicles that are likely to be affected and replace the engine ECU.
Engine control unit may restrict motor power
A manufacturing non-conformity may cause unstable voltage, illuminate a warning light and restrict motor power. The vehicle may fail to restart or the battery may not charge. The engine control unit will be replaced.
Official DVSA recall text
- Component
- LOSS OF POWER
- Defect
- Due to none conformity during manufacture the resistance of the insulated base inside the Engine Control Unit (ECU) which controls the electric motor may decrease. As a result the voltage in the circuit may become unstable causing the warning light to illuminate and the driving motor power to be restricted to the fail safe control. In the worst case scenario the vehicle may not be able to be restarted and the battery may not be able to be charged.
- Remedy
- Recall the vehicles that are likely to be affected and replace the engine ECU.
Brake assistance may be reduced
A brake servo pump fault may trigger warning lights and audible warnings, and stop the vacuum pump. The driver may need to apply greater force to the brake pedal to stop. The vacuum pump control software will be updated.
Official DVSA recall text
- Component
- BRAKING EFFICIENCY MAY BE AFFECTED
- Defect
- The brake servo pump system could develop problems with malfunction indicator lamps and audible warnings accompanied by the vacuum pump stopping. This will require the driver to apply greater force on the brake pedal to stop the vehicle.
- Remedy
- Recall the vehicles that are likely to be affected to download the vacuum pump with a new version of the control software.
Vacuum pump may stop and reduce braking assistance
The brake servo pump system may show warning lights and sounds, and the vacuum pump may stop. The driver may need to press the brake pedal harder to stop. The vacuum pump control software will be updated.
Official DVSA recall text
- Component
- BRAKING EFFICIENCY MAY BE AFFECTED
- Defect
- The brake servo pump system could develop problems with malfunction indicator lamps and audible warnings accompanied by the vacuum pump stopping. This will require the driver to apply greater force on the brake pedal to stop the vehicle.
- Remedy
- Recall the vehicles that are likely to be affected to download the vacuum pump with a new version of the control software.
Vacuum pump fault may reduce braking efficiency
A brake servo pump fault may trigger warning lights and sounds, then stop the vacuum pump. Greater force may be needed on the brake pedal to stop. The vacuum pump control software will be updated.
Official DVSA recall text
- Component
- BRAKING EFFICIENCY MAY BE AFFECTED
- Defect
- The brake servo pump system could develop problems with malfunction indicator lamps and audible warnings accompanied by the vacuum pump stopping. This will require the driver to apply greater force on the brake pedal to stop the vehicle.
- Remedy
- Recall the vehicles that are likely to be affected to download the vacuum pump with a new version of the control software.
Vacuum pump may reduce braking assistance
A nonconforming internal vacuum pump component may reduce braking assistance over time. The vacuum pump will be replaced.
Official DVSA recall text
- Component
- POSSIBLE LOSS OF BRAKING ASSISTANCE
- Defect
- On the affected vehicles an internal component of the braking assistance system vacuum pump may not conform. This could over time lead to a reduction in braking assistance.
- Remedy
- Recall the vehicles that are likely to be affected to replace the vacuum pump.
Sources: NHTSA (US National Highway Traffic Safety Administration), DVSA (UK Driver and Vehicle Standards Agency) and the EU Safety Gate (European Commission) recall data. Each recall covers vehicles sold in that market; models sold elsewhere may differ.