Alpine A110 recalls

7 official safety recalls for the Alpine A110 from NHTSA (United States), DVSA (United Kingdom) and the EU Safety Gate, newest first. Recall repairs are normally free at the maker’s dealers.

Whether your car is affected and still needs the repair depends on its VIN or registration. Check it on the official site for your country:

  1. Rear wheel rim width engraving may be incorrect

    Reported October 24, 2024Model years 2024DVSA recall R/2024/425EU Safety Gate OR/00007/256 vehicles affected

    The engraved wheel rim width on the rear wheels may not comply with requirements. The existing engraving will be removed and replaced with the correct one.

    Official DVSA recall text
    Component
    Incorrect Label Tyre Informaiton
    Defect
    On certain vehicles the wheel rim width - engraved on the rear wheel rims (left and right) is not compliant
    Remedy
    Current engraving will be removed and replaced with correct new ones.

  2. Fuel pump impeller may restrict fuel supply

    Reported December 4, 2023Model years 2017–2022DVSA recall R/2023/347811 vehicles affected

    Friction from an internal fuel pump impeller may reduce or stop fuel supply to the engine. The pump gauge module will be replaced and/or the injection computer software reprogrammed.

    Official DVSA recall text
    Component
    On affected vehicles the fuel supply to the engine can be reduced or even made impossible due to the friction of the impeller an internal component of the fuel pump.
    Defect
    On affected vehicles the fuel supply to the engine can be reduced or even made impossible due to the friction of the impeller an internal component of the fuel pump.�
    Remedy
    Replace the pump gauge module and/or reprogram the injection computer software.

  3. Chassis may deform and cause loss of control

    Reported March 1, 2023Model years 2023EU Safety Gate A12/00862/23

    Production errors may cause the chassis to deform, leading to loss of vehicle control and accident risk. The remedy is to recall the product from end users.

    Official EU Safety Gate text
    Component
    Injuries
    Defect
    The chassis may deform due to errors in the production. This can lead to loss of vehicle control, creating a risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
    Remedy
    Recall of the product from end users
    Notes
    Notified by France

  4. Fuel pump fault may cause engine to stall

    Reported July 13, 2021Model years 2018–2020DVSA recall R/2023/239192 vehicles affected

    A fault in the fuel pump module may prevent the vehicle from starting and, in rare cases, cause loss of torque or engine stalling. The fuel pump module will be replaced and the injection computer reprogrammed.

    Official DVSA recall text
    Component
    On affected vehicles there is a potential fault with the fuel pump module. This could result in the vehicle not starting and in rare circumstances a loss of torque or engine stalling.
    Defect
    On affected vehicles there is a potential fault with the fuel pump module. This could result in the vehicle not starting and in rare circumstances a loss of torque or engine stalling.
    Remedy
    Replace the fuel pump module and reprogram the injection computer.

  5. Metal particles may cause engine failure

    Reported July 23, 2019EU Safety Gate A12/1200/19

    Metal particles may block the oil pressure control solenoid valve in the high-pressure position, potentially causing engine failure and increasing the risk of an accident. The product is recalled from end users.

    Official EU Safety Gate text
    Component
    Injuries
    Defect
    Metal particles can block the oil pressure control solenoid valve in the "high oil pressure" position. This may result in engine failure, increasing the risk of an accident.
    Remedy
    Recall of the product from end users
    Notes
    Notified by Portugal

  6. Front hood lock may allow hood to open

    Reported June 11, 2019EU Safety Gate A12/1018/19

    The front hood lock may not be tightened sufficiently, allowing the hood to open while driving and increasing the risk of an accident. The product is recalled from end users.

    Official EU Safety Gate text
    Component
    Injuries
    Defect
    The lock of the front hood may not be sufficiently torqued. This may result in the front hood opening in motion, increasing the risk of an accident.
    Remedy
    Recall of the product from end users
    Notes
    Notified by France

  7. Poorly secured wiring may melt against exhaust

    Reported June 11, 2019EU Safety Gate A12/1017/19

    Inadequately routed and secured wiring may touch the exhaust and melt, causing a short circuit and engaging limp-home mode. The product is recalled from end users.

    Official EU Safety Gate text
    Component
    Injuries
    Defect
    The wiring route may be inappropriate and without adequate fixation. In the event of contact with the exhaust, the wiring can melt, leading to short circuit and engaging of the limp-home mode.
    Remedy
    Recall of the product from end users
    Notes
    Notified by France

Sources: NHTSA (US National Highway Traffic Safety Administration), DVSA (UK Driver and Vehicle Standards Agency) and the EU Safety Gate (European Commission) recall data. Each recall covers vehicles sold in that market; models sold elsewhere may differ.

Back to the Alpine A110