What it means
The cylinder 6 alternative-fuel injector control circuit has a range or performance fault. The code does not specify current ramp, dwell, peak voltage, or a particular cause.
At a glance
- Usually lights the check-engine light
- Affects emissions; the car can fail an emissions test
How it works
The control module operates the alternative-fuel injector for cylinder 6 through a dedicated driver circuit. P22F0 sets when the circuit's behaviour is outside its expected range or performance; the code does not specify which electrical characteristic is abnormal or prove the injector itself is at fault.
Common causes
Most likely first.
- Alternative-fuel injector fault
- Wiring or connector fault
- Control-module driver fault
Symptoms
- Check engine light on
- Misfire or rough idle on the affected cylinder
- Increased fuel consumption
- Possible fuel smell or smoke from exhaust
How to diagnose it
- Record freeze-frame data and review live cylinder 6 misfire and fuel-system data to identify when the fault occurs.
- Inspect the cylinder 6 alternative-fuel injector connector and harness for loose terminals, corrosion, chafing, or damaged repairs.
- Compare cylinder 6 circuit readings and injector operation with the manufacturer's diagnostic information and other cylinders where applicable.
- Test the injector winding and circuit continuity using the manufacturer's procedure to separate an injector fault from a wiring fault.
- If the injector and wiring pass, test the cylinder 6 control-module driver according to the manufacturer's procedure.
Common fixes
- Restore a loose or corroded connection at the cylinder 6 injector.
- Repair damaged wiring or connector terminals in the cylinder 6 control circuit.
- Replace the cylinder 6 alternative-fuel injector if testing confirms it is faulty.
- Repair or replace the control module if its cylinder 6 driver is confirmed faulty.
Can I keep driving?
If there is no severe misfire, drive gently and arrange diagnosis soon; avoid heavy loads if the engine runs roughly. Continued misfiring can increase emissions and may damage the exhaust catalyst.
A code shows where the control module detected a fault, not always which part failed. Check the causes in order and confirm with a test before replacing parts. Have several codes? Check them together
This is a generic code: it means the same on every make. The car’s maker may add more detail in its own service information.