What it means
Fault on the indicator that shows the passenger airbag is disabled (typically a "PASSENGER AIRBAG OFF" lamp).
At a glance
- Usually lights the airbag (SRS) or body-system warning light
How it works
The restraint control module checks the passenger-airbag-disable indicator, commonly a PASSENGER AIRBAG OFF lamp or display message. This code sets when that indicator’s circuit or response is outside the module’s expected criteria, so the displayed status may not reliably show whether the passenger airbag is disabled.
Common causes
Most likely first.
- Failed passenger-airbag-disable indicator lamp or display
- Open or short in indicator wiring
- Loose or corroded connector
- Fault in the restraint control module
Symptoms
- Warning light or symbol related to the affected system
- Comfort or safety function impaired
How to diagnose it
- Scan the restraint module for related codes and freeze-frame or event data to determine when the passenger-disable indicator fault was detected.
- With the ignition on, check whether the passenger-airbag-disable lamp or message appears during its normal self-check and when the passenger airbag is disabled.
- Inspect the indicator, its visible wiring, and connectors for damage, looseness, or corrosion.
- Test the indicator circuit for an open or short using the vehicle wiring information and compare results with the manufacturer’s specification.
- If the lamp or display and wiring pass, check the restraint module’s indicator command and feedback using the manufacturer’s diagnostic procedure.
Common fixes
- Secure or clean a loose or corroded indicator connector.
- Repair damaged wiring or an open or short in the indicator circuit.
- Replace the failed passenger-airbag-disable lamp or repair the display.
- Repair or replace the restraint control module if its indicator output is confirmed faulty.
Can I keep driving?
Do not rely on the passenger-airbag status display until it works correctly, especially when using a rear-facing child seat. Follow the vehicle’s instructions for passenger seating and arrange prompt diagnosis.
A code shows where the control module detected a fault, not always which part failed. Check the causes in order and confirm with a test before replacing parts. Have several codes? Check them together
This is a generic code: it means the same on every make. The car’s maker may add more detail in its own service information.