What it means
The restraint control module monitors driver seat occupant position sensor D as part of the occupant position system. It sets this code when it detects a fault in that sensor or its circuit; the title does not specify the failure mode.
At a glance
- Usually lights the airbag (SRS) or body-system warning light
How it works
Driver seat occupant position sensor D provides a position input to the restraint control module, which uses occupant-position information in managing airbag protection. B00BA indicates that the module has detected a fault involving sensor D or its circuit, without identifying the exact failure mode.
Common causes
Most likely first.
- Faulty driver seat occupant position sensor D
- Damaged wiring or connector at the sensor
- Obstruction or damage affecting sensor readings
- Fault in the restraint control module
Symptoms
- Warning light or symbol related to the affected system
- Comfort or safety function impaired
How to diagnose it
- Read restraint-system codes and freeze-frame data, then check the scan tool's live status for driver seat sensor D and whether the fault is current.
- Check the driver seat for objects or physical changes that could block or disturb sensor D.
- Inspect sensor D's wiring and connector for damage, looseness, corrosion, or signs of a previous repair, following the manufacturer's restraint-system precautions.
- Monitor sensor D data while the driver seat is moved normally if permitted, looking for an absent, erratic, or implausible reading.
- Measure sensor D and its circuit using the manufacturer's test procedure and specification; only suspect the restraint control module after those checks pass.
Common fixes
- Remove an obstruction affecting sensor D.
- Repair or secure damaged wiring or the sensor D connector.
- Replace driver seat occupant position sensor D if it fails the specified checks.
- Repair or replace the restraint control module after confirming sensor D and its circuit are serviceable.
Can I keep driving?
Have the restraint warning diagnosed promptly because the system may lack reliable driver-position information in a crash. Do not disturb seat or airbag wiring while driving or without the proper precautions.
A code shows where the control module detected a fault, not always which part failed. Check the causes in order and confirm with a test before replacing parts. Have several codes? Check them together
This is a generic code: it means the same on every make. The car’s maker may add more detail in its own service information.