What it means
The restraint control module monitors driver seat occupant classification sensor C as part of the seat classification system. It sets this code when it detects a fault in that sensor or its circuit; the title does not specify the failure mode.
At a glance
- Usually lights the airbag (SRS) or body-system warning light
How it works
Driver seat occupant classification sensor C is one of the sensing elements used to assess the driver seat for restraint-system decisions. B00B2 points to a fault involving sensor C or its circuit specifically; it does not identify the failure mode or implicate sensors A, B, D, or E.
Common causes
Most likely first.
- Faulty driver seat occupant classification sensor C
- Damaged wiring or connector beneath the seat
- Sensor readings affected by seat or upholstery damage
- Fault in the restraint control module
Symptoms
- Warning light or symbol related to the affected system
- Comfort or safety function impaired
How to diagnose it
- Read restraint-module codes and available seat-sensor data with a scan tool that supports the vehicle's restraint system.
- Check whether B00B2 is current and whether other driver-seat sensor codes suggest a shared connector, wiring, or module problem.
- Inspect the driver-seat cushion and upholstery around sensor C's sensing area for damage or interference.
- With the restraint system safely disabled as instructed by the manufacturer, inspect sensor C's connector and wiring beneath the seat.
- Test sensor C and its circuit using the manufacturer's diagnostics, and compare its reported data with the other seat sensors if available.
- If sensor C and its wiring test correctly, investigate the restraint control module and its connections.
Common fixes
- Remove or correct seat-cover interference affecting sensor C.
- Reconnect and secure a loose sensor C connector.
- Repair damaged wiring or terminals in the sensor C circuit.
- Replace driver seat occupant classification sensor C when testing confirms failure.
- Repair or replace the restraint control module if vehicle-specific testing confirms an internal fault.
Can I keep driving?
A fault in driver-seat classification can affect restraint decisions in a collision. Arrange prompt diagnosis and do not assume the airbag system will respond normally.
A code shows where the control module detected a fault, not always which part failed. Check the causes in order and confirm with a test before replacing parts. Have several codes? Check them together
This is a generic code: it means the same on every make. The car’s maker may add more detail in its own service information.