What it means
This code identifies a fault associated with the passenger seatbelt pretensioner C deployment control. The failure type byte specifies the detected fault.
How it works
The passenger seatbelt pretensioner C is an SRS component designed to tighten the passenger's belt in a crash. The restraints control module monitors its deployment circuit and records this code when it detects a fault; the accompanying subfault information identifies the failure type.
Common causes
Most likely first.
- Pretensioner circuit wiring or connector fault
- Open or short in the deployment circuit
- Faulty pretensioner
- Restraints control module fault
Symptoms
- Airbag or SRS warning light
- Pretensioner may not operate as intended in a crash
How to diagnose it
- Read the SRS subfault details and freeze-frame data first to determine the reported circuit condition and when it occurred.
- Inspect the passenger pretensioner C connector and harness for damage, corrosion, loose fit, or pinching.
- Check for other SRS codes that may point to shared module power, ground, or connector problems.
- Following the manufacturer's safety procedure, test the passenger pretensioner C circuit for an open or short consistent with the subfault.
- If wiring checks pass, test the passenger pretensioner C assembly and restraints control module using the manufacturer's procedure.
Common fixes
- Reconnect or repair a loose or corroded passenger pretensioner C connector.
- Repair damaged or shorted wiring in the passenger pretensioner C deployment circuit.
- Replace the passenger seatbelt pretensioner C assembly if testing confirms it is faulty.
- Repair or replace the restraints control module if the circuit checks pass and module testing confirms a fault.
Can I keep driving?
The vehicle may be driveable, but the passenger belt pretensioner C may not function as intended in a crash. Keep the belt correctly fastened and arrange prompt SRS diagnosis; do not probe deployment wiring outside the manufacturer's safety procedure.
A code shows where the control module detected a fault, not always which part failed. Check the causes in order and confirm with a test before replacing parts. Have several codes? Check them together
This is a generic code: it means the same on every make. The car’s maker may add more detail in its own service information.